16
ARTDIO USB 3D SOUND CONFIGURATION SETTINGS
[1] MAIN SETTING
Output Device
Analog Output Select the appropriate audio output device, such as
Headphone “ ” and Speaker “ | ”. |
S/PDIF Output Select S/PDIF for digital audio output settings. | |
Audio Jack Audio output jack “ | ” (green) for speaker, and audio input |
jack “ ” (red) for microphone. |
|
DSP (Digital Sound Processing) Mode Use the settings below to change
the DSP mode. |
| |
1)Click on 7.1 Virtual Speaker Shifter button |
| |
2)Select to change the 7.1 virtual speaker system settings. |
| |
3)Use the Volume Control to adjust the volume. |
| |
4)Click on “ | ” to test the 7.1 virtual speaker settings, or “ | ” to stop. |
17
[2] MIXER
Audio Settings
Vol “ 
”: Use the Volume Control to increase or decrease the volume, drag the Balance slider to change the balance between left and right speakers.
Rec “ 
”: Use the Volume Control to adjust the recording volume.