Installing the Software, Installation Screenshots

INSTALLING THE SOFTWARE

Note: You must connect the SS-200 speaker to your computer before installing

the software.

1.Place the installation CD-ROM into the CD-ROM drive on your computer.

2.The setup program will start automatically; if the auto run does not start, please install manually by double-click on the setup (.exe) file on the CD-ROM drive.

3.Please follow the instructions in the setup program to complete the installation.

INSTALLATION SCREENSHOTS

1) Please wait while the setup extracts the files needed to be installed, SSCtrl Driver.

2)Note: Please connect the SS-200 speaker to your computer before continue the setup.

3)Please wait while the setup prepares the installation for SSCtrl driver, which will guide you through the rest of the setup process.

4)Click “Next” to continue the setup.