Specifications, Amplifier section | a/d/s/ PH30.2 specification

specifications

amplifier section		PH 30.2
power output 4	(watts)1	6 channel 6 x 75
		3 channel 3 x 250
power output 2	(watts)2	6 x 112.5
fuse type		70 A maxi
dimensions		13" x 19 7/8" x 2"
distortion all channels driven		<0.1% 20Hz to 20,000Hz
frequency response		±1dB 10Hz to 30,000Hz
signal-to-noise ratio full		>90dB
bandwidth @ rated output power
damping factor @ output		>150
connector full bandwidth
input sensitivity		100mV to 8Vrms for full output
input impedance		47 k
crossover section
ch 1 & 2		high-pass 12dB/octave variable 45Hz- 5kHz
h 3 & 4		high-pass & low-pass 12 dB octave variable 45Hz- 5kHz
ch 5 & 6		low-pass 12 dB / octave variable 45Hz- 5kHz
Constant Bass		low-pass 12dB/octave variable 30Hz- 300Hz

1 All channels driven, continuous FTC rated 4 load, 20Hz to 20,000Hz, <0.1% THD, power input voltage at 13.8DVC.

2 All channels driven, continuous FTC rated 2 load, 20Hz to 20,000Hz, <0.1% THD, power input voltage at 13.8DVC.

3 All channels are selectable with infinitely variable adjustments from 45Hz to 5,000Hz with a slope of 12dB/octave and a "Q" of .707.