Turbosound TCS SERIES USER user manual Flying single enclosures

Page 17

user manual

TCS series

Flying single enclosures

Single enclosures may be flown using a variety of different methods:

Standard eyebolts (available from Turbosound or third party suppliers) attached to the rigging points provided on the top and back of the cabinet. The rigging point at the rear of the cabinet is used to alter the downward angle of the enclosure.

OmniMount series 25, series 50, series 75 and Powerdrive series 75 wall and ceiling brackets (not supplied) for use with smaller TCS series enclosures such as the TCS- 10, TCS-20, TCS-30 and TCS-35.

tcs manual page 17

Image 17
Contents TCS Series TCS series TCS series TCS series Unpacking the TCS series loudspeaker ThanksIntroduction FeaturesProduct Range Summary TCS series TCS series Amplifier considerations System RequirementsSystem Configurations TCS series LMS-D6 Loudspeaker Management System Loudspeaker Connections Cable Length Connecting CablesGeneral Flying and LiftingFlying single enclosures TCS series TCS series Installation of a single TCS series enclosure using eyebolts TCS series Flying multiple TCS-56/59 enclosures TCS series Rigging Instructions for a 2-wide TCS-56/59 array Rigging Instructions for a 3-wide TCS-56/59 array Rigging the TCS-40 with 3-wide TCS-56/59 arrays 12 LF, 1 HF TCS-20 TCS-30 TCS-35 TCS-40 TCS-56 TCS-59TCS-108SP Shipping Limited WarrantyWarranty Coverage Limitation of implied warranties Incidental and consequential damagesUse of thread locking compounds Appendix CTCS series