Graco 3A0096B important safety instructions Prime/Flush, Follow Pressure Relief Procedure on

Page 13

Pressure Relief

Procedure

1.Lock the dispense valve trigger.

2.Shut off the power to the pump:

•In an air-powered system, close the air regula- tor (H) and the bleed-type master air valve (J).

•In a hydraulic-powered system, close the hydraulic supply line shutoff valve (E) first, then the return line shutoff valve (S).

3.Unlock the valve trigger.

4.Hold a metal part of the valve firmly to the side of a grounded metal pail, and trigger the valve to relieve pressure.

5.Lock the valve trigger.

6.Open the fluid line drain valve and the pump bleed valve (N). Have a container ready to catch the drain- age.

7.Leave the pump bleed valve open until ready to dis- pense again.

If you suspect that the nozzle or hose is completely clogged, or that pressure has not been fully relieved after following the steps above, very slowly loosen the retaining nut, nozzle, or hose end coupling and relieve pressure gradually, then loosen completely. Now clear the nozzle or hose.

Pressure Relief Procedure

Prime/Flush

NOTE: The pump is tested with lightweight oil, which is left in to protect the pump parts. If the fluid you are using may be contaminated by the oil, flush it out with a com- patible solvent before using the pump.

Flush with a fluid that is compatible with the fluid you are pumping and with the wetted parts in your system. Check with your fluid manufacturer or supplier for rec- ommended flushing fluids and flushing frequency. Always flush the pump before fluid dries on the displace- ment rod.

NOTICE

Never leave water or water-based fluid in a carbon steel pump overnight. If you are pumping a water-based fluid, flush with water first. Then flush with a rust inhibitor, such as mineral spirits. Relieve pressure, but leave rust inhibitor in pump to protect parts from corrosion.

1.Follow Pressure Relief Procedure on page 13.

2.Supply solvent to the pump.

3.Hold a metal part of the valve firmly to the side of a grounded metal pail.

4.Start the pump. Always use the lowest possible fluid pressure when flushing.

5.Trigger the valve.

6.Flush the system until clear solvent flows from the valve.

7.Relieve the pressure.

3A0096B

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Displacement Pump Package with NXT Air Motor L500CM Displacement PumpHydraulic Motor and L500CM Related Manuals ContentsPump Input Pressure Series Ratio None Ink Pump PackagesSource Psi MPa, barSkin Injection Hazard Equipment Misuse Hazard 3A0096B Grounding All Pumps InstallationLocation Fluid supply container follow your local codeAir Line Accessories Air-Powered PumpsFluid Line Accessories Typical Installation, Air-Powered Pumps Key Hydraulic-Powered Pumps Typical Installation, Hydraulic-Powered Pumps Key Tighten Clamps SetupWet Cup Drain Fitting Wet CupFollow Pressure Relief Procedure on Pressure Relief ProcedurePrime/Flush Start Up and Adjust Pump Shutdown Follow Pressure Relief Procedure,All Pumps Package Selection Chart Air-Powered Ink PackagesParts Part Description QtyHydraulic-Powered Ink Package Pump Package Dimensions DimensionsMaximum Fluid Working Pressures Technical DataGraco Information Graco Standard Warranty

3A0096B specifications

The Graco 3A0096B is a standout product in the realm of airless paint sprayers, designed to meet the demand of both professionals and DIY enthusiasts. Engineered for efficiency and precision, this sprayer is an exemplary choice for tackling a variety of painting tasks. One of its key features is the powerful pump that allows for the consistent flow of paint, ensuring smooth and even coverage on surfaces. With a maximum delivery rate of 0.24 gallons per minute, the Graco 3A0096B can handle large projects with ease, minimizing the time spent on applying finishes.

A notable aspect of the Graco 3A0096B is its FlexLiner system. This innovative technology enables users to switch between different paints quickly and easily without the need for extensive cleaning. The FlexLiner bags are also designed to reduce waste, allowing for efficient use of materials. This is particularly beneficial for projects that require multiple colors or finishes, as it streamlines the process and reduces downtime.

The sprayer features a reversible tip that allows for easy unclogging during operation. This capability is essential for maintaining workflow and preventing interruptions due to paint blockages. The Graco 3A0096B is also designed to accommodate a range of tip sizes, giving users the flexibility to choose the right spray pattern for their specific application needs, from fine finishes to wider coats.

One of the standout characteristics of the Graco 3A0096B is its lightweight design. Weighing just a little over 10 pounds, this sprayer is portable and easy to transport, making it ideal for both indoor and outdoor projects. Its compact size ensures that it can be maneuvered easily in tight spaces, allowing for comprehensive coverage without compromising quality.

Additionally, the Graco 3A0096B comes with a durable, easy-to-use control handle that helps in managing the spray direction and pressure. This feature provides users with greater control over their work, ensuring a professional finish every time. The unit is also equipped with an adjustable pressure control, which allows for fine-tuning of the spray pressure depending on the thickness of the coating being applied.

In conclusion, the Graco 3A0096B is a versatile, efficient, and user-friendly airless paint sprayer that is well-suited for a wide range of painting applications. Its combination of advanced technology, ease of use, and portability makes it a valuable tool for anyone looking to achieve a flawless finish in their painting projects. Whether for residential or commercial use, the Graco 3A0096B is built to deliver outstanding performance and reliability.
Top Page Image Contents