Graco 3A0096B important safety instructions Start Up and Adjust Pump, Air-Powered Pumps

Page 14

Start Up and Adjust Pump

Start Up and Adjust Pump

Keep hands and fingers away from the priming piston during operation and whenever the pump is charged with air. The priming piston extends beyond the intake housing to pull material into the pump and can ampu- tate a hand or finger caught between it and the intake housing. Follow the Pressure Relief Procedure on page 13 before checking, clearing, or cleaning the priming piston.

Air-Powered Pumps

1.Supply fluid to the pump, per the requirements of your system.

2.Be sure the pump air regulator (H) is closed.

3.Open the bleed-type master air valve (J).

4.Hold a metal part of the valve firmly to the side of a grounded metal pail and hold the trigger open.

5.Adjust the pump air regulator (H) until the pump starts.

6.Cycle the pump slowly until all air is pushed out and the pump and hoses are fully primed.

7.Release the valve trigger and lock the trigger safety. The pump should stall against pressure.

8.Use the pump air regulator to control the pump speed and the fluid pressure. Always use the lowest pressure necessary to get the desired results. Higher pressures cause premature nozzle and pump wear.

9.Go to All Pumps, page 15.

Hydraulic-Powered Pumps

1.Supply fluid to the pump, per the requirements of your system.

2.Open the dispensing valve(s).

3.To adjust the system, perform the following proce- dure:

a.Turn on the hydraulic power supply.

b.Open the flow control valve (H) all the way.

c.Adjust the pressure-reducing valve (K) until you get the desired fluid pressure. Run the pump until all air is purged from the fluid lines.

d.Count the cycle rate of the pump.

e.Close the flow control valve (H) until the cycle rate and fluid pressure start to drop.

f.Open the flow control valve slightly until the cycle rate and fluid pressure return to the desired level. This method of setting the hydrau- lic controls ensures proper pump operation and will prevent pump runaway and damage if the fluid supply runs out.

4.Release the valve trigger and lock the trigger safety. The pump should stall against pressure.

5.Always use the lowest pressure necessary to get the desired results. Higher pressures cause prema- ture nozzle and pump wear.

6.Go to All Pumps, page 15.

14

3A0096B

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Hydraulic Motor and L500CM Package with NXT Air Motor L500CM Displacement PumpDisplacement Pump Contents Related ManualsSource Ink Pump PackagesPump Input Pressure Series Ratio None Psi MPa, barSkin Injection Hazard Equipment Misuse Hazard 3A0096B Location InstallationGrounding All Pumps Fluid supply container follow your local codeFluid Line Accessories Air-Powered PumpsAir Line Accessories Typical Installation, Air-Powered Pumps Key Hydraulic-Powered Pumps Typical Installation, Hydraulic-Powered Pumps Key Wet Cup Drain Fitting SetupTighten Clamps Wet CupPrime/Flush Pressure Relief ProcedureFollow Pressure Relief Procedure on Start Up and Adjust Pump All Pumps Follow Pressure Relief Procedure,Shutdown Parts Air-Powered Ink PackagesPackage Selection Chart Part Description QtyHydraulic-Powered Ink Package Dimensions Pump Package DimensionsTechnical Data Maximum Fluid Working PressuresGraco Standard Warranty Graco Information

3A0096B specifications

The Graco 3A0096B is a standout product in the realm of airless paint sprayers, designed to meet the demand of both professionals and DIY enthusiasts. Engineered for efficiency and precision, this sprayer is an exemplary choice for tackling a variety of painting tasks. One of its key features is the powerful pump that allows for the consistent flow of paint, ensuring smooth and even coverage on surfaces. With a maximum delivery rate of 0.24 gallons per minute, the Graco 3A0096B can handle large projects with ease, minimizing the time spent on applying finishes.

A notable aspect of the Graco 3A0096B is its FlexLiner system. This innovative technology enables users to switch between different paints quickly and easily without the need for extensive cleaning. The FlexLiner bags are also designed to reduce waste, allowing for efficient use of materials. This is particularly beneficial for projects that require multiple colors or finishes, as it streamlines the process and reduces downtime.

The sprayer features a reversible tip that allows for easy unclogging during operation. This capability is essential for maintaining workflow and preventing interruptions due to paint blockages. The Graco 3A0096B is also designed to accommodate a range of tip sizes, giving users the flexibility to choose the right spray pattern for their specific application needs, from fine finishes to wider coats.

One of the standout characteristics of the Graco 3A0096B is its lightweight design. Weighing just a little over 10 pounds, this sprayer is portable and easy to transport, making it ideal for both indoor and outdoor projects. Its compact size ensures that it can be maneuvered easily in tight spaces, allowing for comprehensive coverage without compromising quality.

Additionally, the Graco 3A0096B comes with a durable, easy-to-use control handle that helps in managing the spray direction and pressure. This feature provides users with greater control over their work, ensuring a professional finish every time. The unit is also equipped with an adjustable pressure control, which allows for fine-tuning of the spray pressure depending on the thickness of the coating being applied.

In conclusion, the Graco 3A0096B is a versatile, efficient, and user-friendly airless paint sprayer that is well-suited for a wide range of painting applications. Its combination of advanced technology, ease of use, and portability makes it a valuable tool for anyone looking to achieve a flawless finish in their painting projects. Whether for residential or commercial use, the Graco 3A0096B is built to deliver outstanding performance and reliability.
Top Page Image Contents