Tuner | Audio functions |
Programming the station manually
Set the desired frequency with the functions ”Manual station search” and ”Fine tuning” if necessary.
Store Press the button on the device short.
The Auro display offers the possibility of storing this frequency at the next free program place (e.g. number 30 flashes); if all program places are occupied, the first program place is offered (digit 1 flashes). Additionally, MEMORY lights.
If you want to accept the suggested program place:
Press the button on the device.
Store
The frequency you specify is then assigned to the suggested program place.
If you want to assign a different program place to the one suggested:
Select the number of the desired programme place with P+/- on the remote control MEMORY lights up and the number for the new programme place flashes.
Store Press the button on the device.
This assigns the frequency you have set to the program place you have selected, MEMORY is hidden.
The audio functions act centrally on the whole audio system regardless of whether ”DVD/CD” or ”Tuner” is switched on as a
Volume
The volume is controlled by V–/V+ on the remote control.
With the ”Sound off/on” button, you can mute the speakers or switch them back on by pressing this button.
Treble and bass
Treble and bass can be set in two ways: in the Sound menu in the Auro display or in the DVD menu.
by the Sound menu in the device display
Press the button (repeatedly).
(SOUND) appears in the Auro display. This opens the
Press 5 once.
(BASS 0)appears in the display. (“0“ is only an example. The value set at Auro is displayed.)
With 34, you can change the settings for the low frequen- cies in a value range of
To change the settings for high frequencies:
Press 5 again.
(TREB 0) appears in the display. (Here, too, “0“ is only an example).
With 34 ”, you can change the settings for the low frequen- cies in a value range of
See also page 39 “Night mode”.
- 38