What to do, if ...
.
Problem | Remedy |
No standby display. | Has the device been connected to the mains properly? |
|
|
No TV picture. | Has the TV been connected properly (see pg. 8)? |
|
|
The message ”Wrong country code” appears after | Europe is within the DVD regional code 2. DVDs which you buy in Europe are designed for this country |
loading a DVD. | code. You cannot play DVDs with other country codes. |
|
|
Distorted picture. | Check the disc for finger marks; wipe clean with a soft cloth from the center to the edges if necessary. |
|
|
Completely distorted display of the user interface or: | Auro is set to the wrong TV norm (NTSC or PAL); see pg. 12. |
no color in the TV picture with the user interface |
|
displayed or: |
|
distorted picture or black and white picture with DVD. |
|
|
|
Disc cannot be played. | Is the DVD loaded with the labeled side up? Has the loaded disc got a playback format which Auro can- |
| not handle (see ”Technical Data” on pg. 43)?. |
|
|
No sound. | 1. Do you have to set up an additional audio connection (pg. 9)? |
| . In Component Video mode: the software of the Loewe LCD TV must be > V2.x. |
|
|
Auro does not react to remote control. | 1. Is Digital Link switched on on Auro? See ”Activate Digital Link?” on pg. 12. |
| . Point the remote control directly at the front of Auro. |
| 3. Make sure the front of Auro is not obstructed. |
| 4. Are the batteries in the remote control OK? |
| 5. DVD/CD allows no further operations. Read the leaflet which comes with the DVD/CD. |
|
|
The TV does not recognize Auro. | 1. Is the |
| . Your TV set must be equipped with software 6.x (Q/S/P 25xx) or higher. Have a look in the ”Main |
| Information /Equipment” menu of your TV. Do you have an older version of the TV software? Contact |
| your Loewe dealer for a TV software update if necessary. |
|
|
DVD picture is green and is displayed twice on the | Check Progressive Scan setting (see page 12). |
screen. |
|
|
|
Picture too dark, one of the colours missing or too weak | Check Progressive Scan wiring (see page 9). |
and discoloration visible on the screen. |
|
|
|
TV shows no DVB station | Disconnect the TV and Auro from the mains and switch back on. |
|
|
With use of the component signal and at the same time | Connect the “AUDIO OUT L/R” sockets of the Loewe TV device to the SCART socket “TO TV” of Auro us- |
“TV as centre loudspeaker“ (see page 9): No sound on | ing an adapter cable stereo cinch |
replay of an analog device (e.g. video recorder, analog |
|
| |
of the Loewe Flat TV or digital device without use of the |
|
digital sound through “audio digital assignment” (e.g. |
|
DVD player/recorder). |
|
|
|
- 42