Loewe Auro 2216 PS manual Cleaning, For your safety, Technical requirements for L-Link

Page 7

Welcome

Cleaning

Only clean your DVD-Preceiver with a damp, soft, clean cloth (with no aggres- sive cleaning agents).

If DVD-Preceiver fails to read the disc correctly, the reader unit in the device may be soiled. Use a commercially-available cleaning disc.

Always keep the disc drawer closed to prevent dust getting into the drawer and onto the lens.

For your safety

For your own safety and to avoid unnecessary damage to your unit, please read and follow the safety advice below:

This DVD-Preceiver is only to be used for receiving, displaying and playing visual and sound signals.

Switch off your DVD system (Centros, TV and any other audio components which may be connected) before connecting or disconnecting other devices or speakers.

• Do not open up the hous- ing, or you could be directly exposed to the laser beam. The laser beam will be visible if the unit is open.

DO NOT LOOK INTO THE LASER BEAM.

Protect your DVD-Preceiver from:

liquids and damp

shock and mechanical stress

magnetic and electrical fields

cold, heat, direct sunlight and extreme fluctuations in temperature

dust

anything which obstructs ventilation

manual interference with the unit‘s interior

Your Auro has only been designed for use in a domestic environment. The war- ranty covers this normal use of the DVD-Preceiver.

PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED OUT BY A LOEWE DEALER.

If you have moved the DVD-Preceiver from a cold to a warm environment, leave it to stand for about an hour because of the risk of condensation building up. Do not switch it on until it has reached room temperature. This will avoid seriously damaging the components.

Read this operating manual, and experiment with your new equipment‘s features so that you are familiar with it.

Advantages of connection to a Loewe TV set

If you connect your Auro to a Loewe TV, you are able to enjoy the Loewe system communication ”L-Link”. With L-Link, Auro and your TV join forces in an intel- ligent network and form a high-performance home cinema system.

Auro and the TV exchange data via the L-Link, among other things to check whether audio data are available (screen stays off) or whether audio and video data are available (screen switches on automatically).

Thanks to L-Link your TV assumes that Auro will take over processing of all audio signals within the equipment network. The Auro switches on automatically when you switch on the TV.

You can operate the whole equipment network with ”one hand” using the Assist remote control.

Technical requirements for L-Link

Loewe TV of chassis generation Q/S/P25xx TV software as of Version 6.0; if your TV is equipped with an older software, please contact your Loewe dealer for a software update

L-Link cable connection must be established in a powerless state; see page 8/9.

Auro must be connected to the Euro AV-input AV2/3 of the TV; see page 9.

-

Image 7
Contents Operating Manual Equipment Contents TV Sound off/on Switch over to operate TV setSwitch over to operate Recorder +Volume down/upAuro 2216 PS Front Panel Auro 2216 PS Rear Panel & Display Scope of delivery Set upWelcome Thank youFor your safety CleaningTechnical requirements for L-Link Connection First installationConnecting antennae TV interferes with AM reception when it is onDigital audio TV Auro Wiring Loewe Flat TV Auro Individual Sound/TremoAudio cable cinch Scart Available in specialised Trade Surround speaker systemSystem to at least 100 Hz Wiring Auro audio systemRemote control Inserting the batteriesNo disc in the drive Switching on for the first timeSetting the language Power mainsActivate Digital Link Switch over PAL/NTSCDoing a reset Switching over to Progressive ScanSpeaker System Setting the loudspeaker systemSelecting the speaker system Connect speakersPress the button See the section on audio functions pg Adjust loudspeaker levelEntering the distance between speakers Do the same for all connected speakers Press the buttonBasic functions Activate the mode of the remote controlAbout operation Inserting a discContext help Menu and windowStatus display TitleChapter Title TableAutomatic functions Sleep timerUser interface of the inserted DVD Numeric inputPress the green button Press button on remote control Or button on Auro MessageStart playback Select titleChapter forward or back Select chapterEnding playback SearchPause single frame Interrupting playbackCamera position Extended functionsSelecting sound format SubtitlesZoom magnify image RepeatSet other markers Using markersPlay from … To move the magnified image section over the whole imagePicture Format Basic settingsSettings Slow motionSetting Digital Sound Output Special features of DVD AudioLanguages Presettings Page Play from … Hide status display Audio-CDRepeat Audio-CDs with CD-TextCD Random End CD Random functionTitle Programming Select the item Delete from Custom File To switch on/off the Custom File functionSave program Custom File To delete the inserted disk from the Custom FileMenu bar MP3 MP3 and JpegMP3 and Jpeg mixed CD TextRotate Jpeg pictures Folder/Title TableTitle Programming/Custom File Kodak Picture CDPrompting the location of the set Child LockActivating the child lock for the first time Determine your personal identification number PINUsing the child lock Tuner Individual resorting Switching tuner displayFine tuning Mono/Stereo switchingTreble and bass VolumeTuner Audio functions Programming the station manuallySound Night modeWith the DVD menu Go to the item Treble or BassSound mode Setting the remote controlStation list on Menu confirm/call Remote control Assist TV-operationPIP on/off picture in picture Menu Other functions on/offWhat to do, if Problem RemedyTechnical Data Service