CROSSOVER NETWORK ADjustment
The ZR crossover networks have been designed
to allow tonal adjustments to the upper midrange response and tweeter level. These adjustments make it possible to
Adjustable Midrange Presence:
Your ZR crossover networks provide a unique
midrange presence control, located under the clear cover. The midrange presence is selectable via a set of pins and allows for four settings. These settings affect the amplitude of the upper midrange response of the ZR component woofer. We recommend that you begin your listening with the factory setting (3) and adjust up or down as needed to compensate for mounting location, orientation or personal taste.
Adjustable Tweeter Level:
ZR crossover networks also provide five levels of tweeter adjustability designed to compensate for different mounting locations, vehicle interiors and personal taste. These levels are selectable via a set of pins located under the clear cover of each crossover case. We recommend that you begin listening in the “REF” (Reference) position. To find the optimum tonal balance in your installation, experiment with alternate tweeter level settings by moving the jumper connector. It is safe to switch jumpers while the system is playing.
Tweeter Protection:
The ZR crossover networks are equipped with an advanced electronic tweeter protection circuit designed to minimize the possibility of tweeter failure. This electronic device monitors current going to the tweeter and will disconnect the tweeter from the signal when it senses overload. Should this occur while listening to the audio system, simply reduce the volume for a few seconds and the protection circuit will reset itself automatically.
6 | JL AUDIO |