Infinity TSS 3-IN-1 manual Introduction, Planning Your System

Page 2

INTRODUCTION

Infinity Total Solutions

The Infinity Total Solutions TSS 3-in-1 loudspeaker is actually three discrete loudspeakers built into a single enclosure. The TSS 3-in-1 incorporates the front left, center and right channels of a home theater system. Simply add a Total Solutions powered subwoofer and satellites for the surround channels to complete a high-performance home entertainment speaker system. The TSS 3-in-1 uses identical drivers to provide exceptional dialogue reproduction and a seamless transition between the front channels. The horizontal design allows for maximum placement flexibility.

About This Guide

Please read this guide completely before connecting and operating the TSS 3-in-1 center channel speaker. Maximum performance is dependent upon following these instructions, as well as those in the owner’s manuals of associated components in your home theater system. Save these instructions for future reference.

Unpacking the Speaker

Finish unpacking the speaker and check the contents. If you suspect damage from transit, report it immediately to your dealer. Keep the shipping carton and packing materials for future use.

Contents

Please verify that the package contains the following items:

(1) TSS 3-in-1 speaker

Part A

Part B

(2)Wall-mount end caps (attached to TSS 3-in-1)

(1) Allen

(1) Speaker base

wrench

(1) Wall bracket with wall bracket cover

PLANNING YOUR SYSTEM

Before deciding where to best place your speakers, survey your room and study Figures 1 and 2. The TSS 3-in-1 should be placed directly above or below the TV.

TSS 3-in-1

 

(above or below TV)

Infinity

 

Subwoofer

 

(not included)

Left

Couch

Right

Surround Channel

Surround Channel

(not included)

(not included)

Figure 1. In this overhead view of a typical installation, the

TSS 3-in-1 is used to reproduce the front channels, and satellite speakers are used to reproduce sound for the surround channels. The powered subwoofer provides bass for movie effects and for music.

Placement

Speaker base

Figure 2. This example shows the TSS 3-in-1 being placed on top of a television. The speaker can also be placed below the television and tilted up (see Figure 3).

NOTE: If placing the TSS 3-in-1 on top of a television, be sure the top of the television has a flat surface large enough to accommodate the speaker base. Do not set the speaker on top of any surface without using the included base.

2TSS 3-IN-1

Image 2
Contents Total Speaker Solutions Introduction Planning Your SystemStep Two Tilting the SpeakerStep One Step ThreeStep Five Step FourStep Six Care of Your Speaker System Wiring the SpeakerWiring and Polarity Surround ModesSpecifications TSS 3- IN-1 Each Channel