Infinity TSS 3-IN-1 manual Step Four, Step Six, Step Five

Step Four

Using the included Allen wrench, remove the top and bottom end caps of the speaker by unscrewing the single center screw on bottom.

End cap

End cap

1/4-20 x 3/4" Screw

Step Six

The wall-bracket design allows for rotation of the speakers at angles of up to 30 degrees of center. Position the speakers so they face toward the primary listening position, before fully tightening.

Step Five

Connect the wires (see page 5). Replace the end caps while capturing the wall bracket between parts A and B of the end cap, securing it in place.

Wall-mount

end cap B

Wall-mount end cap A

4TSS 3-IN-1