Infinity TSS 3-IN-1 manual Wiring the Speaker, Care of Your Speaker System, Surround Modes

Page 5

WIRING THE SPEAKER

After placing the speaker, you are ready to connect it to your system. First, turn off all audio system power. Use high-quality speaker wire to make the connections. Consult the owner’s manuals included with your amplifier or receiver for connection and operation procedures.

Surround Modes

When using the TSS 3-in-1 in a Dolby® Digital or DTS® home theater system, make sure the receiver’s/processor’s front left, front right and center channel speaker modes are set to “Small.”

Wiring and Polarity

The TSS 3-in-1 speaker has gold-plated terminals that can accept bare wire. To ensure proper polarity, connect each

+terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker, as shown in Figure 4. Connect the – (black) terminals in a similar way. See the owner’s manuals that were included with your amplifier or receiver to confirm connection procedures.

Be sure to connect the left-channel wires to the left-most terminals, the center channel wires to the middle terminals, and the right-channel wires to the right-most terminals.

Important!

Do not reverse polarities (i.e., + to – or – to +) when making connections. Doing so will degrade the imaging and bass response of the home theater system.

After correctly placing and wiring the TSS 3-in-1 and the rest of your speaker system, adjust the levels for all of the channels as recommended by the manufacturer of your receiver/processor.

2 1

One channel shown.

+

Figure 4. This example shows how to connect bare wires to the terminals. Banana plugs may also be inserted directly into the rear of the connector.

1Loosen the terminals.

2Insert bare ends; tighten terminals.

CARE OF YOUR SPEAKER SYSTEM

When needed, use a soft cloth to remove any fingerprints or to wipe off dust. Do not use any cleaning products or polish. Clean the grille by gentle vacuuming.

If your TSS 3-in-1 should ever need service, please contact your local dealer or distributor, or visit www.infinitysystems.com for the location of a service center.

TSS 3-IN-1

5

Image 5
Contents Total Speaker Solutions Planning Your System IntroductionStep One Tilting the SpeakerStep Two Step ThreeStep Five Step FourStep Six Wiring and Polarity Wiring the SpeakerCare of Your Speaker System Surround ModesTSS 3- IN-1 Each Channel Specifications