DigiTech RP300A manual Storing/Copying/Naming a Preset, Store

Page 13

Storing/Copying/Naming a Preset

Once the Preset has been modified to your liking, you may store your settings to any of the 40 User Preset locations (Presets U1-U40). The following steps outline the procedure for storing changes to a Preset or copying a Preset to a different location:

1.Press the Store button once. The Store button LED will blink and the first character in the Display will Flash indicating that you can now name your custom creation.

2.Use the Number 1 Knob or Up/Down Footswitches to select the desired alpha- numeric character.

3.Rotate the Number 2 Knob clockwise to select the next character location, and counterclockwise to select the previous character location. Then repeat step 2 to select the desired alpha-numeric character.

Store

4.Once the desired name is shown in the display, press the Store button again to enter the second stage of the storing process. The Display will alternate between showing the new name, and the name of the Preset about to be overwritten.

5.Select the User Preset location your new sound will reside in using the Number 5 Knob or the Up/Down Footswitches. The Display will continue to alternate between showing the new Preset name and name of the Preset about to be overwritten.

6. Press the Store button again to save the changes.

Press the Select or Drums buttons at any time to abort the Store procedure.

The procedure for copying one Preset to another Preset location is the same. Simply use the Footswitches to select the Preset that you want to copy, then follow the steps listed above.

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s Guide Important Safety Information Declaration of Conformity Warranty Getting Acquainted RP300A PS0913B Power Supply Warranty CardIncluded Items Guided Tour of the RP300A RHYTHM30Front Panel Rear Panel Mono Operation Getting Started Making ConnectionsStereo Operation Applying Power Performance Mode PresetsBypass Mode Tuner ModeUsing Learn-A-Lick Learn-A-Lick ModeJam-A-Long Drum MachineSection Two Editing Functions Editing/Creating PresetsMatrix Store Storing/Copying/Naming a PresetAbout the Effects Section Three Effects and ParametersEffect Definitions Pickup/WahAmp Modeling/Cab CompressorNoise Gate Flange FLaNge Chorus ChorusTriggered Flanger Trgflg Triggered Phaser Trgpha Phaser PHaseRTremolo Tremlo Panner PannerVibrato viBRTO Parameter 1 The Number 2 Knob adjusts the PedalRotary Speaker Rotary YaYa yayaEnvelope Filter eNvlOp SynthTalk syNtLKDetune DetUNe Pitch Shift PitCH1OCTUP 1 octave above Whammy no Dry Signal Harmony Bends Dry Signal Added2OCTUP 2 octaves above ActionExpression Pedal Section Four Other FunctionsLFO SwitchExpression Pedal Calibration Factory ResetSwitch Sensitivity Section Five Appendix Factory Preset ListPower Consumption 10 Watts Memory 40 User SpecificationsInput 1/4 TS Drum Machine 30 Patterns Simultaneous Effects up to
Top Page Image Contents