DriveRack® PX
Getting Started | Section 2 |
•Rotate the <Data> wheel to select any one of the numerous MAIN speaker options available. If the speaker being used is not specified in the menu, select CUSTOM. (Note that you can scroll by category by pressing the Select knob and placing the arrow next to the category heading above the speaker name. Press the Select knob again to place the arrow next to the speaker name to scroll by speaker name.) Once you have selected your Main speaker option, press the <NEXT PG> button and the display will appear as follows:
Sub Speakers
Select Sub(s)
•Rotate the <Data> wheel to select any one of the numerous SUB speaker options available. (Note that you can scroll by category by pressing the Select knob and placing the arrow next to the category heading above the speaker name. Press the Select knob again to place the arrow next to the speaker name to scroll by speaker name.) Once you have selected your SUB speaker option, press the <NEXT PG> button.
•You will now be given the option of optimizing your main speakers’ levels with the DriveRack PX. The page will appear something like this:
Main Speaker Levels Adjust speaker levels as shown
>
31% Level
•Turn the volume (level) knob on each of your main powered speaker(s) to the position shown in this screen. When you’ve done this, press the <NEXT PG> button.
•If you’re using sub speaker(s), you will now be given the option of optimizing your sub speakers’ levels with the DriveRack PX. The page will appear something like this:
Sub Speaker Levels Adjust speaker levels as shown
>
40% Level
•Turn the volume (level) knob on each of your sub speakers to the position shown in this screen. When you’ve done this, press the <NEXT PG> button. (If you’re not using sub speakers, this step will be skipped.)
•The display will now prompt you to load the preset you’ve just created.
® |
| |
|
|
|