dbx Pro PX user manual Two Mains/One Subwoofer Setup

Section 6 Application Guide

DriveRack® PX

30

6.2 Two Mains/One Subwoofer Setup

Hardware

1.Make sure that the mixer and powered speakers are turned off prior to powering up the DriveRack® PX.

2.Connect the outputs from the mixer to the inputs of the DriveRack® PX.

3.Connect the main outputs of the DriveRack® PX to the main powered speakers.

4.Connect the Left/Mono sub output of the DriveRack® PX to the sub powered speaker.

Software

1.Use the Wizard to set up a specific preset. Press and hold the <SETUP> button to begin. See page 8 for more information.

			Mixer
+10	+10	+10	+10	+10	+10	+10	+10
+5	+5	+5	+5	+5	+5	+5	+5
0	0	0	0	0	0	0	0
-5	-5	-5	-5	-5	-5	-5	-5
-10	-10	-10	-10	-10	-10	-10	-10
-20	-20	-20	-20	-20	-20	-20	-20
-30	-30	-30	-30	-30	-30	-30	-30
-	-	-	-	-	-	-	-
1	2		3	4	5	6

Right Input Left/Mono Input

PREV PG	NEXT PG	SETUP	Inputs	Outputs	Sub Outs
					Limiter
			Headroom dB	Headroom dB	Headroom dB

				6	6	6	DriveRack PX
	SUBHARMONIC COMP/LIMITER		EQ	0	0	0	®
				12	12	12	Powered Speaker
	PRESET	STORE	AFS	24	24	24	Optimizer
				36	36	36
				SIG	SIG	SIG
	RECALL	UTILITY	WIZARDI
Right Main	Left/Mono						Left/Mono
		Main					Sub

JBL PRX515 JBL PRX515

JBL PRX518

®