DriveRack® PX
Editing Functions | Section 3 |
3.5 Navigating the Comp/Limiter Section
From preset mode, press the comp/limiter button to move to either the Compressor or Limiter module(s). Successive presses of COMP/LIMITER button will will toggle between the
Compressor and Limiter modules. Navigate through the Pages of the Compressor module by pressing the "Next Page" or "Prev Page" buttons successively until you arrive at the desired Page.
| COMP/LIMITER | ||||
The Comp/Limiter button |
|
|
|
| COMP |
|
|
|
| ||
toggles through |
|
|
|
| |
the Compressor or |
|
|
|
|
|
|
|
|
|
| |
Limiter modules. | COMP/LIMITER | ||||
| |||||
LIMITER
Comp On/Off
Over Easy Off,
Limiter On/Off
Over Easy Off,
Threshold
COMPRESSOR/LIMITER
Threshold
Ratio 1:1 to ∞Inf:1
Gain
Successive presses of the Data wheel will select effect parameters within the currently selected page.
3.6 Navigating the EQ Section
To edit the parameters of the EQs used in a selected preset, simply use the following procedure. From preset mode,
press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button toggle between the GEQ and the PEQ. Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
The EQ button toggles through the EQs used in each channel of the selected preset menu.
EQ
GEQ
or
PEQ
| GEQ On/Off |
|
| Frequency |
| |||
|
|
|
| |||||
| Flatten/Restore |
|
| Gain |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PEQ On/Off |
|
|
|
|
| Band 1 Freq | |
| Flatten/Restore |
|
|
|
|
| Gain | |
| Bell,HSelf, LShelf, LHShelf, |
|
| Q .20 to 16.0 | ||||
|
|
|
|
|
|
|
|
|
GEQ/PEQ
| Band 2 Freq |
|
| Band 3 Freq |
| Gain |
|
| Gain |
| Q .20 to 16.0 |
|
| Q .20 to 16.0 |
|
|
|
|
|
Successive presses of the Data wheel will select parameters within the currently selected page.
®
17