dbx Pro PX user manual Application Guide, Mains-Only Setup No Subs, Hardware, Software

DriveRack® PX

Application Guide Section 6

Section 6 - Application Guide

This Application guide section is provided to offer suggested installation applications of the DriveRack® PX that will allow you to optimize peak performance of the units. Note that the 25 included application presets represent the flexibility of the DriveRack® PX. These applications can be used verbatim, or as sample reference guide templates for designing numerous audio applications.

6.1 Mains-Only Setup (No Subs)

Hardware

1.Make sure that the mixer and powered speakers are turned off prior to powering up the DriveRack® PX.

2.Connect the outputs from the mixer to the inputs of the DriveRack® PX.

3.Connect the main outputs of the DriveRack® PX to the main powered speakers.

Software

1.Use the Wizard to set up a specific preset. Press and hold the <SETUP> button to begin. See page 8 for more information.

			Mixer
+10	+10	+10	+10	+10	+10	+10	+10
+5	+5	+5	+5	+5	+5	+5	+5
0	0	0	0	0	0	0	0
-5	-5	-5	-5	-5	-5	-5	-5
-10	-10	-10	-10	-10	-10	-10	-10
-20	-20	-20	-20	-20	-20	-20	-20
-30	-30	-30	-30	-30	-30	-30	-30
-	-	-	-	-	-	-	-
1	2		3	4	5	6

Right Input Left/Mono Input

PREV PG	NEXT PG	SETUP	Inputs	Outputs	Sub Outs
					Limiter
			Headroom dB	Headroom dB	Headroom dB

			6	6	6	DriveRack PX
SUBHARMONIC	COMP/LIMITER	EQ	0	0	0	®
			12	12	12	Powered Speaker
PRESET	STORE	AFS	24	24	24	Optimizer
			36	36	36
			SIG	SIG	SIG
RECALL	UTILITY	WIZARDI

Right Main	Left/Mono
	Main

JBL PRX515 JBL PRX515

® 29