Introduction, Features | DCM Speakers TFE100 / TFE200 specification

	INTRODUCTION	NOTES
	Congratulations on your purchase of DCM Time Frame Evolution Series Loudspeakers. Your new	NOTES

	speakers represent the latest technologies in loudspeaker design and manufacturing. They will provide
	outstanding performance and years of listening enjoyment. Please take time to read through this manual
	thoroughly to insure you get maximum performance out of your new loudspeakers.

FEATURES

•Video shielding for placement near a TV or monitor

•35 mm soft dome tweeter

•Kevlar cone midrange in a separate sealed enclosure.

•Glass fiber cone woofer

•Internally braced Medium Density Fiberboard (MDF) cabinets, 1" thick front baffle

•Bi-ampable

•Nickel-plated 5-way binding posts

•Rich Harmony Teak finish to blend in with any decor

•Perforated, radiused steel grille

•Feet with adjustable or removable carpet spikes

•DCM 10 year warranty

SPEAKER PLACEMENT

All DCM Time Frame Evolution Series Loudspeakers have been engineered to combine deep, powerful bass with crisp, natural high frequency performance. Because there are many factors that affect loud- speaker performance, there is no universal rule for speaker location. Best results will be obtained with some experimentation using the following guidelines.

HOME THEATER SYSTEM

FRONT LEFT AND RIGHT CHANNELS

To achieve the most realistic front image, position the speakers so that an equilateral triangle is formed between the front left and right speakers and the listening position (Figure 1). Turning the speakers slightly inward towards the listening position can improve the image focus. Set the surround processor or receiver to the "large" setting on the "front speaker size" (or similar description) control.

Bass loudness can be increased by moving the speakers closer to the rear wall. This sometimes can degrade the front image. Use your judgement as to what location best fits your preference. We recom- mend that the speakers be kept at least 24" from the rear wall and 36" from the side walls for optimal imaging.

SURROUND LEFT AND RIGHT CHANNELS

If you are using the TFE100 or TFE200 for rear channel speakers, they should be placed along the side walls and slightly behind the listening position (Figure 1). If this is not practical, they can be placed along the rear wall to either side of the listening position (Figure 2). For best results, the surround speakers should be spaced equal distances from the listening position.

MULTI-CHANNEL AUDIO SYSTEM

The TFE100 and TFE200 are engineered to deliver all the definition, bandwidth and dynamic range of

5.1channel audio (whether SACD or DVD-Audio) with astonishing realism. In fact both models have sufficient low frequency extension that the user has the option of eliminating the subwoofer and just use five TFE100's or TFE200's for the complete system. Be sure that your surround processor or receiver has sufficient bass management capability to direct full range signals to the five main speakers if you are not using a subwoofer (See Figure 3). Both models are identically timbre-matched so that a combination of TFE100's and TFE200's can be used in a five channel system with the result being a seamless three dimensional image and total musical envelopment. For example, three TFE200's could be used for the front left, right and center channel speakers, and two TFE100's for the left and right rear speakers.

TWO CHANNEL STEREO SYSTEM

When using the TFE100 or TFE200 in a two channel stereo system, to achieve the most realistic stereo image, position the speakers so that an equilateral triangle is formed between the speakers and the lis- tening position (Figure 4). Turning the speakers slightly inward towards the listening position can improve the stereo image focus.

Bass loudness can be increased by moving the speakers closer to the rear wall. This sometimes can degrade the stereo image. Use your judgement as to what location best fits your preferences. We rec- ommend that the speakers be kept at least 24" from the rear wall and 36" from the side wall for optimal imaging.

INTRODUCTION