INSTALLATION TIPS
Any speaker will perform to its best capabilities, when correctly placed in the listening area. FUSION Engineers recognise that unlike a home or motor vehicles installation, there are an extremely wide range of marine environments where speakers may be placed. FUSION Marine Speakers are optimised to perform in the widest possible range of mounting locations, but a little thought and care with placement will always be rewarded with better sound.
•High frequencies are directional. Placing the speakers low down in the boar will lose some of this information.
•Speakers should be placed to simulate “sound stage”, by being placed where you are able to hear both speakers in a stereo situation.
TROUBLESHOOTING
Before you contact your FUSION dealer or service centre, FUSION requires that you do some simple trouble shooting to help diagnose the problem.
Problem | Solution | |
|
| |
No sound | Check all connections from the | |
| source unit amplifier to the speaker | |
| terminals are connected correctly | |
|
| |
System lacks in bass | Check the connections from the | |
| source unit/amplifier to the speaker. | |
| Ensure the positive wire from the | |
| source is connected to the positive | |
| of the speaker. | |
|
| |
System lacks in | Check polarity | |
high frequencies |
| |
Check the bass / treble control | ||
| ||
| settings on the source unit | |
|
| |
Distorted sound | Check all wiring | |
|
| |
| Check that it is not the surrounding | |
| panels of the craft rattling. | |
| Check connections from the source | |
| to the speaker. | |
|
|
YOU CAN HELP PROTECT THE ENVIRONMENT Please remember to respect the local regulations:
Hand in the
2 | 7 |