Goodman Mfg 000 BTUH + 115 Volt, MSC/MSH 9, 000 &12 specs

IMPORTANT NOTES:

•If there are safety issues concerning the power supply, the unit should not be connected until safety issues are resolved.

•Ensure that the electrical power supply is sufficient to safely power and run the unit.

•Power voltage should range for 90% - 110% of the rated voltage.

•Main power switch and surge protector should be 1.5 times the capacity of the maximum current of the unit and should be installed in the power circuit.

•The unit is to be grounded per NEC.

•Connect all wiring as shown in the Electrical Wiring Dia- gram located on the panel of the outdoor unit.

•All wiring must comply with local and national electrical codes. Installation should be done by qualified electri- cians.

Electrical box cover

Figure 22

4.Ensure the color of the wires of the outdoor unit and the terminal numbers are the same as the indoor unit’s.

5.Wrap the wires not connected with terminals with insula- tion tape, so they will not touch any electrical compo- nents. Secure the wires onto the control board with the cord clamp.

To avoid the risk of personal injury, wiring to the unit must be properly polarized and grounded.

•This unit should have a individual branch circuit.

NOTE: The wire gauge and the current rating of the fuse or breaker are determined by the minimum circuit ampacity and maximum overcurrent protection device that is indicated on the nameplate, located on the side panel of the unit. Refer to the nameplate before selecting the wire, fuse and/or breaker.

Connect the Cable to the Outdoor Unit

1.Remove the electrical control board cover from the out- door unit by loosening the screw as shown in Figure 23.

Connect the Cable to the Indoor Unit

NOTE: Before performing any electrical work, turn off the main power to the system.

HIGH VOLTAGE!

Disconnect ALL power before servicing. Multiple power sources may be present. Failure to do so may cause property damage,

personal injury or death.

1.The inside and outside connecting wire can be connected without removing the front grille.

2.Connecting wire between the indoor unit and outdoor unit should be approved, polychloroprine sheathed, flexible cord, type designation H07RN-F or heavier.

3.Lift up the indoor unit panel, remove the electrical box cover by loosening the screw as show in Figure 22.

Figure 23

2.Connect the connective wires to the terminals, making sure the numbers on the indoor unit match with the num- bers on the outdoor unit’s terminal block. (See Models A and B.)

000 BTUH + 115 Volt, 000 &12, MSC/MSH 9 specifications

Goodman Manufacturing is a renowned brand in the HVAC industry, known for its reliable and efficient heating and cooling solutions. Among their offerings, the Goodman MSC/MSH series, specifically the 9,000 and 12,000 BTUH models, stand out as highly effective, compact air conditioning units designed for residential and light commercial applications.

These units provide a reliable cooling solution with a modest 115-volt electrical supply, making them suitable for various settings without the need for significant electrical upgrades. The Goodman MSC/MSH units employ advanced refrigerant technology, ensuring efficient heat exchange and optimal energy usage. The units feature a SEER (Seasonal Energy Efficiency Ratio) rating that meets or exceeds modern energy efficiency standards, helping homeowners save on electricity bills while reducing their carbon footprint.

A key characteristic of the MSC/MSH series is their compact design, which allows for easy installation in tight spaces. The lightweight construction simplifies transport and handling, making it easier for HVAC professionals to install these units in challenging locations like attics, closets, or small commercial areas. Additionally, these models are equipped with a durable cabinet that is designed to withstand the elements, including corrosion-resistant materials that ensure longevity and reliability.

The Goodman MSC/MSH series features an innovative multi-speed fan that provides enhanced airflow while operating quietly, contributing to a comfortable indoor environment. Furthermore, with their user-friendly controls, these units allow for easy temperature adjustments, ensuring that users can maintain their desired indoor climate with minimal effort.

Another notable technology within these models is the inclusion of a scroll compressor, which is known for its efficiency and durability. This compressor type is quieter compared to traditional reciprocating models, further adding to the comfort of the living space. The MSC/MSH series also includes a built-in safety switch designed to prevent the unit from running in unsafe conditions, thereby extending the life of the system and enhancing user safety.

In summary, Goodman Manufacturing's MSC/MSH 9,000 and 12,000 BTUH models provide a reliable, efficient, and versatile cooling solution, making them a favorable choice for homeowners and light commercial users alike. With advanced technology, user-friendly features, and a commitment to durability, these units exemplify Goodman’s dedication to quality and performance in the HVAC market.