Insignia NS-10PDVDD manual Selecting the aspect ratio, Setting parental controls

07-343_NS-10PDVDD.fm Page 24 Monday, July 9, 2007 3:40 PM

Insignia NS-10PDVDD 10" Personal DVD Player

Selecting the aspect ratio

When your player is connected to an TV or monitor, you can select the aspect ratio for the TV or monitor.

To select the aspect ratio:

1Press SETUP. The General Setup Page opens.

2Press ENTER. TV Display is highlighted.

3Press to access the TV Display options.

4Press or to select the aspect ratio. You can select:

•Normal/PS–Displays the video image full-screen when your player is connected to a standard TV.

•Normal/LB–Displays the video image with black bars at the top and bottom when your player is connected to a standard TV.

•Wide–Displays the video image full-screen when your player is connected to a widescreen TV.

Setting parental controls

To set parental controls:

1Make sure that the disc tray is empty.

2Press SETUP. The General Setup Page opens.

3Press or to select PREFERENCES, then press ENTER.

4Press or to select Parental, then press ENTER.

5Press or to select the rating you want to block. The rating you select and all higher ratings are blocked. You can select:

•KID SAFE (All children)

•G (General audiences)

•PG (Parental guidance suggested)

•PG 13 (Parents strongly cautioned)

•PGR (Parents very strongly cautioned)

•R (Restricted)

•NC-17(No one under 17)

•ADULT (Adults only) (factory default)

6Press ENTER, then enter the password. The default password is 3308.

Note

If you change the password, then forget it, enter 3308.

24www.insignia-products.com