Dolby Laboratories DVD Player manual More Audio DVD, Send a Test Tone, Perform

SCREEN SETUP- continued

Audio [DVD]

The DVD players provides various types of audio output to set on and that include 2-channel digital stereo sound, and Dolby Digital 5.1/DTS digital surround sound.

1 Press SETUP in the stop mode.

2 Press / to select “AUDIO” and press ENTER.

3 Press / to select “Analog Out” or “Digital Out”, and then press ENTER.

!If you want to listen to the sound of audio CDs and DVDs in stereo on your audio system via analog output, select “Analog Out”.

!If you want to listen to the home theater surround sound of DVDs on your multiple dynamic speakers, select “Digital Out”.

4 Press / / to select “Dolby D” or “DTS” or “MP3” or “Other”, and then press ENTER.

!Select the audio setting “Dolby D”, “DTS”, “MP3”, or “Other” depending on the kind of audio discs you play on the DVD video player.

5 Press / / to select a high qual- ity dynamic or a stereo sound.

!If you set “Digital Output” to <Raw> from on-screen display the sound will be output as the original sound recording format on DVD discs (For example, Dolby Digital, DTS). If you set to <PCM>, the sound will ONLY be output as Linear PCM format sound in disregards to the original sound recording format on DVD discs. Linear PCM format sound can ONLY hear digital stereo (2-channel) sound though the playback disc may provide 5.1-channel digital surround sound.

6 Press ENTER.

WARNING:

!Do not connect both analog output (R/L) and digital output (Coaxial/optical) at the same time for audio output.

To return to the setup menu

Select / to return to the setup menu heading.

To finish the setup operation

Press SETUP to exit.

SCREEN SETUP- continued

More Audio [DVD]

You can obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

1 Press SETUP in the stop mode.

2 Press / to select “MORE AUDIO” and press ENTER.

3 Press / to switch “Pro Logic” to “ON” or “OFF”, and then press EN- TER.

!Switch “Pro Logic” ON, the DVD player can provides Dolby Pro Logic Surround sound by connecting to a multiple speaker system (right and left front speakers, a center speaker, and one or two rear speakers).

!Switch “Pro Logic” OFF when you want to play a DVD audio discs via 2-channel digital sound output.

Send A Test Tone		Settings
You can output a test tone to check each individual speaker for
realistic surround sound after connection.		Initial
4	Perform the step 1 and 2
5	Press / to select “PINK NOISE”

6 Press / / to select a speaker you want to send a test tone.

!You will hear the test tone from the speaker you selected.

NOTE

!Select “PINK NOISE” to “OFF” to turn off the test tone.

To return to the setup menu

Select / to return to the setup menu heading.

To finish the setup operation

Press SETUP to exit.

2 1