Dolby Laboratories DVD Player manual Precautions

Page 4

Precautions

Please read these precautions before operating this unit.

!Power cord protection

To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following.

"Hold the plug firmly when connecting or disconnecting the AC power cord.

"Keep the AC power cord away from heating appliances.

"Never put any heavy object on the AC power cord.

"Do not attempt to repair or reconstruct the AC power cord in any way.

!Placement

Avoid placing the unit in areas of:

"direct sunlight or heating radiators, or closed automobiles

"high temperature (over 350C) or high humidity (over 90%)

"much dust as the internal parts may be seriously damaged.

!Non-use periods

When the unit is not being used, turn it off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet.

!No fingers or other objects inside

"Touching internal parts of this unit is dangerous, and may cause serious damage to the unit. Do not attempt to disas- semble the unit.

"Do not put any foreign object on the disc tray.

!Keep away from water/magnet

"Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage could occur.

"Never bring a magnet or magnetized object near the unit.

!Stacking

"Place the unit in a horizontal position, and do not place anything heavy on it.

!Condensation

Moisture may form on the lens in the following conditions:

"immediately after a heater has been turned on

"in a steamy or very humid room

"when the unit is suddenly moved from a cold environment to

a warm one

If moisture forms inside this unit, it may not operate properly. In this case, turn on the power and wait about one hour for the moisture to evaporate.

!If there is noise interference on the TV while a

broadcast is being received

Depending on the reception condition of the TV, interference may appear on the TV monitor while you watch a TV broadcast and the unit is left on. This is not a malfunction of the unit or the TV. To watch a TV broadcast, turn off the unit.

Selecting the type of disc for the type of TV connected

Both the DVD discs and video CDs have the material recorded in the PAL and NTSC systems. Refer to the table below to select the correct disc type for the type of connected TV.

!Connecting to the multi-system TV

!Connecting to the NTSC TV

!Connecting to the PAL TV

Getting Started

1

Image 4
Contents DVDPlayer-Receiver FCC and Safety Information Never make or change connections with the power switched onImportant Safety Instruction Outdoor use or wet location applicationsPrecautions Selecting the type of disc for the type of TV connectedContents DVD Playback Programming DVDsStopping Playback Rapid Advance Rapid ReverseSkipping Ahead or Back to Chapters Still Picture PauseSelecting Scenes by Title/Chapter Number Direct Selection of ScenesSelecting Scenes by Time Repeat Playback Convenient FunctionsChanging Audio Soundtrack Language Hiding/Displaying SubtitlesChanging Subtitle Language Press Subtitle during playbackUsing the Menu Function Using the Title menuViewing From Another Angle Adjusting Video Picture Setting Speaker Sound BalancePress + Volume buttons to adjust the speaker volumes To Mute the DVD PlayerBasic Playback Video CD PlaybackMenu Playback Skipping Ahead or Back to Tracks Locating a Specific FrameSetting Audio Sound Effect Information Video CDsPause Play Press EQ againPress A-B again at the point where repeat playback ends B Audio CD PlaybackInformation Audio CDs Displaying the Information of the Playing TrackProgramming Audio CD Soundtrack To Clear Program PlayPress Stop Press Program Press the number buttons to arrange the play listTo Cancel Shuffle Play Shuffle PlayPlaying MP3 Music Discs Press ShuffleManual Tuning Auto Scan TuningRadio Operation To Store Stations Into MemoryRDS Tuning Press Power on Displaying Brocasting Information Press RDS buttonAutomatic Searching Press PTY button repeatedly until Sports appearsLanguage Setup On-Screen Display OSD Language SettingPress / to select Audio then press Enter To return to the setup menuPress / to select DVD Menu then press Enter Screen Setup Press Setup in the stop modeTo return to the setup menu TV ShapeAudio DVD More Audio DVDSend a Test Tone PerformCustom Setup Password DVDFactory pre-set password Rating DVDTroubleshooting Symptom Common RemedySymptom Video CD Disc Handling and Maintenance Handling PrecautionsIf the surface is soiled C Improper disc storageDefinition of Terms