Amphion M510 manual Indicators, Using the car adapter, Using the battery pack

Page 13

Indicators

There are two indicators at the front side of the player.

1.The left indicator indicates the capacity of the battery.

If the battery pack is not full, the color of the indicator is red. If the battery pack is full, indicator turns green.

2.The right indicator indicates the status of the player.

If the POWER ON/OFF is set to ON, the indicator is green. If the POWER ON/OFF is set to OFF, the indicator is off.

NOTE

If the battery pack is not in latch slot, when you use the adaptor to supply the power of the player, the left indicator is green.

Using the car adapter

+ DC IN

ON/OFF

1 To DC IN 9V jack

2

To car lighter socket

1.Connect the car adapter to the main unit.

Insert the car adapter plug to the DC IN 9V jack of the main unit.

2.Insert the plug of car adapter to the car lighter socket.

You may need to use the supplied car adapter depending on the shape of the car lighter socket.

Using the battery pack

Charging the battery pack

1.Connect the power to the battery pack.

2.Insert one end of the supplied power cord to the adapter socket.

Use only the supplied power cord.

3. Insert the plug of car adapter to the car lighter socket.

You may need to use the supplied car adapter depending on the shape of the car lighter socket.

When recharging is completed

The charge indicator turns green. After making sure the color of the indicator is green, disconnect the AC adapter and the supplied power cord.

12

Image 13
Contents M510 Before Using this Player Power Cord Warnings Important Safety Instructions Maintenance Handling precautionsIf the Surface is soiled Improper disc storageTable of Contents Video CD Accessory ListM510 Quick User Guide Connecting the PowerOpening the LCD screen Opening the Disc CoverTurning the power OFF Turning the power onPlacing a Disc Playing a DiscParts and controls PreparationsButton-type battery Lithium battery Remote controlUsing the car adapter IndicatorsUsing the battery pack Connecting the battery pack to the unit Duration to Recharge the Battery Recharge timePlaying back When the menu screen is displayedPress Open to open the display Panel Unit and open the disc coverRemoving the disc To turn the power offPress Display Mode on the unit Display mode on the liquid crystal displayTo clear the resumed point Full NormalPress four times to enter the Phase function Information about On Screen Display OSD Operation with OSDDetailed Description of each OSD Menu Icon Changing Subtitle Language Using a Title / DVD MenuViewing from another Angle Changing Audio Soundtrack LanguagePress or to select the Preference Repeat viewing listening Press Repeat during playback Repeat PlayRepeating viewinglistening Press Repeat during playback Pressed, repeat options are shown as followsProgram Play Zoom FeaturePlayback with MP3 What is DVD-Audio What is WMAWhat is JPEG? Playing Your Jpeg Files Playing Your Jpeg FilesChanging setup values Initial SettingsSpeaker Setup Downmix Speaker Setup Spdif Setup Dolby Digital SetupPost Drc PCM ChannelVideo Setup Equalizer 3D Processing Video Setup EQ TypeBass Boost Super BassLuma Delay Video Quality Setup SharpnessBrightness ContrastPreference TV Type DefaultAudio SubtitlePassword Password Setup Password ModeExit Setup Exit Setup Menu Connection Connecting to a wide TV/ an AV TVConnecting to an active speaker system Connecting to an audio equipmentOutput sound from the optical output terminals of this unit Troubleshooting Language codes Remote control Remote control does not workExplanation of terms Others Chapter