Amphion M510 Equalizer 3D Processing Video Setup EQ Type, Bass Boost, Super Bass, Treble Boost

Changing setup values (continued)

Equalizer

3D Processing Video Setup Page

Equalizer

EQ Type:

There are 7 types of EQ setting.You may select the favorite sound effect depending on the playing disc.

Bass Boost:

Enable the "Bass Boost" function.

Super Bass:

Enable the "Super Bass" function.

This function only works when "Bass Boost" is on.

Treble Boost :

Enable the "Treble Boost" function.

3D Processing

Reverb Mode:

3D PROCESSING MODE selection. There are 7 options including "Concert, Living Room, Hall, Bathroom, Cave, Arena, Church".

Select this function to enter the following menu:

Component

The primitive Component setup is Vga output. If the value of

Component is set to Off, there is no picture on the player.

If you want to see the picture on the player again,

	just turn off the power and reset.
	TV CVBS
	Set this function "on" to output the video signal on the
	player to TV. During the period of TV CVBS output, the
	screen of the player is blue. If you want to see the vi-
	deo signal on the player again, just set this function"off".
	Or, turn off the power and reset.
	S VIDEO:
	Set this function "on" to output the video signal on the
Video Setup	player to TV. During the period of S VIDEO output, the
	screen of the player is blue.If you want to see the video
	signal on the player again, just set this function"off".Or,
	turn off the power and reset.
	QUALITY:
	There are seven selective items in this function. They are Sh-
	arpness, brightness, contrast, Gamma, Hue, Saturation and
	Luma Delay. Press PLAY or "ENTER" to enter the selective
	items and press	or	to select which item you want to set.
	And then press	or	to set the value of the selected item.

26