REMOTE CONTROL OPERATION
BATTERY INSTALLATION/REPLACEMENT
Remove the battery compartment cover according to the diagram on the right.
1: Press the ridged area to the left.
2: At the same time, pull the battery tray out.
3: Remove the old CR2025 battery. Replace it with a new CR2025 lithium battery on the tray with the positive side facing upward.
4: Replace the cover.
Note: Do not expose the battery to excessive heat.
REMOTE CONTROL FUNCTIONS
1
2
3
4
5
6
7
1.ANGLE
Press to switch the viewing angles. Note: This function only works with discs encoded with multiple camera angles.
2.FUNCTION
Press to switch between the 16:9 and 4:3 aspect ratios.
3.SETUP
Press to enter/exit the Setup Menu.
4.REPEAT
Press to switch the repeat modes. Note: For VCD2.0 discs, this function is invalid when the PBC function is activated.
5.TITLE
Press to return to the title menu of a DVD disc.
6.PREVIOUS ( 
)/UP Press to skip to the previous chapter/track.
Press to navigate in an up direction when a menu is displayed on the screen.
7.FAST REWIND ( 
)/LEFT Press repeatedly for fast reverse playback. The available speeds are 2X, 4X, 8X, 16X, and 32X.
Press to navigate in a left direction when a menu is displayed on the screen.
- 11 -