Bose 3.2.1 GS Series Making system connections, Connecting the speakers to the Acoustimass module

System Setup

Making system connections

CAUTION: Do not plug the Acoustimass® module into an AC power (mains) outlet until all the components are connected.

Note: If additional audio cables or longer cables are needed to make these connections, contact Bose Customer Service. Refer to the list of offices included in the product carton.

Connecting the Acoustimass module to the media center

Plug one end of the Acoustimass module cable into the Acoustimass Module jack on the rear

of the media center (Figure 6). Plug the other end of the cable into the input ( ) jack on the rear of the Acoustimass module.

Note: The jacks for the Acoustimass module cable are keyed so that the cable connectors only plug in one way. Make sure that the arrow on the connector body faces up when plugging in the cable.

Figure 6

Acoustimass module-to- media center connection

Media center rear panel

Acoustimass module cable

Acoustimass module input jack

Connecting the speakers to the Acoustimass module

1.Insert the single-plug end of the speaker cable into the SPEAKERS jack on the rear panel of the Acoustimass module (Figure 7). Tighten both screws on the plug.

Figure 7

Speaker cable-to- Acoustimass module connection

Acoustimass

Speaker cable

module cableAcoustimass module input jack

12