2 Press the | 3 Set the current time with the |
(TIME) button. | TIMER control button. |
4 Press the 
(TIME) button again. The time indication starts lighting instead of flashing.
● The time indication will disappear automatically in 10 second.
AM |
| PM | ● | To check the current time setting, | |
|
| ||||
PM | PM |
|
| press the | (TIME) button twice. |
| Example: The current time is 1:30 p.m. |
|
| The setting of the current time is | |
|
|
| now complete. | ||
2 Set the
PM
3 Point the signal window of the remote controller toward the indoor unit, and press the 
(RESERVE) button.
The 
(OFF) mark starts lighting instead of flashing and the sign 
(RESERVED) lights. A beep occurs and the 
(TIMER) lamp lights on the indoor unit.
PM
Example: The device will turn off at 11:00p.m.
The setting of
2 Set the
3 Point the signal window of the remote controller toward the indoor unit, and press the 
(RESERVE) button.
The 
(ON) mark starts lighting instead of flashing and the 
(RESERVED) sign lights. A beep occurs and the 
(TIMER) lamp lights on the indoor unit.
AM
AM
Example:
The device will automatically turn on earlier so that the preset
temperature can be reached at 7:00 a.m.
The setting of the
4 Set the | 5 Point the signal window of the remote controller toward the indoor unit, and | |||||||
TIMER control button. | press the | (RESERVE) button. |
|
|
|
| ||
| The |
| (ON) mark starts lighting instead of flashing and the |
| (RESERVED) sign | |||
|
|
| ||||||
|
| |||||||
| lights. A beep occurs and the |
| (TIMER) lamp lights on the indoor unit. | |||||
|
| |||||||
PM
PM
AM
AM
Example:
The device will turn off at 10:30 p.m. and then automatically turn on earlier so that the preset temperature can be reached at 7:00 a.m.
The settings of the
●The timer may be used in three ways:
●As the time settings are stored in memory in the remote controller, you only have to press
the (RESERVE) button in order to use the same settings next time.
– 13 –