HEATING OPERATION
●Use the device for heating when the outdoor temperature is under 21°C.
When it is too warm (over 21°C), the heating function may not work in order to protect the device.
1 | Press the FUNCTION selector so that the display indicates | ||
(HEAT). |
|
| |
| Set the desired FAN SPEED with the | (FAN SPEED) button | |
| (the display indicates the setting). |
| |
| (AUTO): The fan speed is HI | at first and varies to | |
2 |
| MED or LOW automatically when the preset | |
| temperature has been reached. | ||
|
| ||
| (HI) | : Economical as the room will become warm | |
|
| quickly. |
|
|
| But you may feel a chill at the beginning. | |
| (MED) | : Quiet. |
|
| (LOW) | : More quiet. |
|
3
START
STOP
Set the desired room temperature with the TEMPERATURE buttons (the display indicates the setting).
The range of
If the temperature setting is 20°C, the room temperature will be controlled at around 20°C.
The temperature setting and the actual room temperature may vary somewhat depending on conditions.
Press the 
(START/STOP) button. Heating operation starts with a beep. Press the button again to stop operation.
■As the settings are stored in memory in the remote controller, you only have to press the 
(START/STOP) button next time.
– 8 –