Attaching the minus ion stick to the filter frame.
●Put the minus ion stick to the lower hooks and install it so as to push up the upper hooks at the left side of front cover.
Upper hook
Minus ion stick
Lower hook
2.Washable Front Panel
●Remove the front panel and wash with clean water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly with clean water.
●When front panel is not removed, wipe it with a soft dry cloth. Wipe the remote controller thoroughly with a soft dry cloth.
●Wipe the water thoroughly.
If water remains at indicators or signal receiver of indoor unit, it causes trouble.
Method of removing the front panel.
Be sure to hold the front panel with both hands to detach and attach it.
Removing the Front Panel
●When the front panel is fully opened with both hands, push the right arm to the inside to release it, and while closing the front panel slightly, put it out forward.
Attaching the Front Panel
Flange
HoleProjection
●Move the projections of the left and right arms into the Flanges in the unit and securely insert them into the holes.
CAUTION
●Do not splash or direct water to the body of the unit when cleaning it as this may cause short circuit.
●Never use hot water (above 40°C), benzine, gasoline, acid, thinner or a brush, because they will damage the plastic surface and the coating.
– 22 –