Common Radio Features
2Press and hold the PTT button and announce your emergency into the microphone.
3Release the PTT button to end the transmission and wait for a response from the dispatcher.
4Press and hold the Emergency button for about a second to exit emergency.
The radio operates in the normal dispatch manner while in Emergency Call, except, if enabled, it will return to one of the following:
Using this operation: | Means you will talk: | |
|
|
|
1 | Tactical/Non- | on the channel you |
| Revert | selected before you |
|
| entered the emergency |
|
| state. |
|
|
|
2 | on a preprogrammed | |
| Revert | emergency channel. The |
|
| emergency alarm is sent |
|
| to this same channel. |
|
|
|
Note: For ALL Emergency signals:
•You can change channels while in Emergency operation if the new channel is also programmed for Emergency. The emergency alarm or call continues on the new channel.
•If the new channel is NOT programmed for Emergency, an invalid tone sounds until you exit the Emergency state or change to a channel programmed for emergency.
30