Motorola MT 1500 manual Conventional Scan Only, Make a Dynamic Priority Change

Common Radio Features

Conventional Scan Only

Make a Dynamic Priority Change

While the radio is scanning, the dynamic priority change feature lets you temporarily change any channel in a scan list (except the priority-one channel) to the priority-two channel. The replaced priority-two channel becomes a non-priority channel. This change remains in effect until scan is turned off, then scanning reverts back to the preprogrammed state.

1When the radio is locked onto the channel to be designated as priority-two, press the preprogrammed Dynamic Priority button.

Note: The priority-one channel cannot be changed to priority-two.

2The radio continues scanning the remaining channels in the list. To resume scanning the preprogrammed priority-two channel, you must leave and re-enter scan operation.

MT 1500 Model 1.5 33