General Radio Operations: Call Alerts | |
|
|
Call Alerts
Sending a call alert lets the recipient know you want to talk to him or her. When you send a call alert, the recipient's radio emits a series of beeps, or vibrates, and displays your Unit Name or ID along with the time and date.
The recipient can:
•Answer – begin a call by pressing the PTT button.
•Clear – delete the call alert.
Sending Call Alerts
NOTE: Only Private Contacts can be alerted.
1. Highlight the Private Name/ID in Contacts or Recent Calls..
Contacts 
Shipping
Maintenance
Smith
Alert
Back
2.Press 
under Alert. “Ready to Alert” appears on the display.
3.Press the PTT button until “Alert Successful” appears on the display.
NOTE: If the alert is not successful, the radio you are trying to reach is either in a call, on another channel, has the radio turned off, or is out of range.
Receiving a Call Alert
When you receive a call alert, you must answer or clear it. You cannot make new calls until you do.
Alert
Smith 9:46pm 11/18
Clear
To answer a call alert, press the PTT button to respond to the sender. To clear a call alert, press 
under Clear.
June 22, 2006 | 6864242V01 |