Radio Programming: Adding Contacts | |
|
|
Selecting Group Only
NOTE: Selecting Group Only on a radio prohibits the user from initiating PrivateCalls. Private contact information is still retained by the radio to identify other units, but the user can only return a PrivateCall during hangtime.
1.Scroll to select Group Only and press 
under Change. The Group Only screen appears.
Group Only
NoneYes
9No
Select Back
NOTE: A 
next to an selection indicates the present selection.
2.Scroll to select the desired entry and press 
under Select. The display returns to the previous screen with the new Group Only entered.
Entering Group Members (PrivateGroup Only)
1.Scroll to select Group Members and press 
under Change. The Group Members screen appears.
Group Members
9Joe Smith Mike Jones Bob White
Add Done
NOTE: A 
next to the left of the Group Member indicates that those members are already part of
the TalkGroup assigned. If the highlight is on a checked item, the left 
changes to
Remov. Pressing 
under Remov removes the check mark.
If no check mark is present, the entry has not been selected and is not part of the
PrivateGroup already assigned. The left 
changes to Add. Pressing 
under Add inserts a check mark.
2.Scroll through the list of Group Members and press 
under Add.
3.When completed, press 
under Done. The display returns to the previous screen with the new Group Members entered.
June 22, 2006 | 6864242V01 |