
Chapter 5 Cloning Mode
Entering Cloning Mode
1.Press
to turn the source radio on.
2.Enter the cloning mode by performing the following steps in sequence:
a.Hold down
and press the PTT button three times.
b.Press the Left
.
c.Press
.
d.Press the Right ![]()
e.Hold down
and press the PTT button three times. The Clone Menu appears.
Clone Menu
Duplicate Rad...
Remote Add C...
Remove Delet...
Select Reset
Adding/Deleting a Contact
These menus are used to add or remove a contact from a Private contact or PrivateGroup contact over the air. This feature is used primarily for fleet maintenance. When adding/deleting a contact to a PrivateGroup contact, the radio attempts to contact all radios within that PrivateGroup and notifies any radios that did not receive the update.
1. From the Clone menu scroll to select Send Contact. Press
under Select.
Remote Add C...
Add:Invalid
To:Invalid
Change Prgm
2. Scroll to select ADD:.