Cloning Mode: Reset All Contacts | |
|
|
10.Press under Prgm. The screen is displayed showing the Add: and To: selections. If
these are correct press under Go to transmit the selection over the air. If the selections
are not correct press under Back to return to the selection menu.
Press Go To
Add:Joe Smith
To:Security
Over The Air
Go Back
11.The screen displays the message "Clone Sending XXXXXXX". X = the contact you are send- ing to. If sending a contact to a PrivateGroup, the display shows each target radio individually.
If cloning was successful, both the source and targets radios indicated “Programming Successful”. If
Reset All Contacts
This key sequence deletes all contacts in the radio. This is useful for radio programming and rental radios.
a.Hold down and press the PTT button three times.
b.Press .
c.Press .
d.Press the Right
e.Hold down and press the PTT button three times.
6864242V01 | June 22, 2006 |