Jensen JIMS-70I user manual Alarm Operations, Setting the Alarms, Setting the Wakeup Mode

Page 10

during playback for fast forward searching within the song.

5.) Press the Button to go to the starting point of current song or previous song. Press and hold the button during playback for fast backward search within the song.

6.) Press the VOLUME + / ALARM 1 or VOLUME - / ALARM 2 buttons to adjust

the volume output level.

7.) Playback will be suspended if there is an incoming call. The iPhone will ring.

8.) Touch the Answer icon once to pick up the call.

9.) Touch the Speaker Button on the iPhone once to answer the call in handsfree mode.

10.) Press the End Call Icon when you have finished answering the call. Music will

resume.

11.) Press and hold the Button until your iPhone/iPod turns off.

12.) Press and hold the POWER/FUNCTION Button to turn JiMS-70i off.

Note:

 Adjust the built-in preset EQ of your Apple device to fine tuning the sound quality to suit your needs.

 The volume control slider on your iPhone or iPod touch are disabled when docked.

 Your Apple device will charge as long as it remains docked.

ALARM OPERATIONS

Your JiMS-70i provides two different wakeup times, ALARM1 and ALARM2. You can choose to use them independently or simultaneously: ALARM 1, ALARM 2 or both ALARM 1 and ALARM 2.

SETTING THE ALARM(S)

Note: Alarm time (s) can only be set in Power Off mode.

1.) To set the wakeup time for ALARM 1 or ALARM 2, press and hold the VOLUME

+/ ALARM 1 or VOLUME - / ALARM 2 buttons for approximately 2 seconds until the hour digit blinks. The Alarm 1 or Alarm 2 Indicator will light depending which Alarm is chosen.

2.) When the hour digit blinks, press the or buttons to adjust your desired hour digit.

Note: For the 12 Hour format, Make sure the Hour is set so that AM or PM is correctly displayed. There is a PM Indicator located in the right bottom corner of

the Display. When it lights the displayed time is PM and vice versa.

3.) Press the VOLUME + / ALARM 1 or VOLUME - / ALARM 2 buttons to save the hour setting, the minute digits will blink.

4.) When the minute digits blink, press the or buttons to adjust your desired minute digit.

5.) Press the VOLUME + / ALARM 1 or VOLUME - / ALARM 2 buttons to save the wakeup setting.

SETTING THE WAKEUP MODE

6.) Following step 5 above, press the VOLUME + / ALARM 1 or VOLUME - / ALARM 2 buttons once to enter the wake up selection mode.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Docking Digital Clock Radio For iPod and iPhone JiMS-70i We Want You Listening For a Lifetime Dear Jensen CustomerTo establish a safe level Customers RecordImportant Safety Instructions Compliance with FCC Regulations Protect Your FurnitureLocation of Controls Product FeaturesTOP View Rear View Clock Display Unit To install the batteries proceed as followsGetting Started Setting the Time Manually Clock SettingBattery Care AC Adaptor OperationTuning the Radio Switching to 24 Hour formatRadio Operations Hints for the Best Reception Storing the Radio Station PresetsRecall Preset Radio Stations Charging Your Apple DeviceSetting the Alarms Alarm OperationsSetting the Wakeup Mode Ii. Wake to Radio Wake to Alarm bIii. Wake to iPod/iPhone Auxiliary Input Sleep TimerTurning the Alarm ON/OFF Snooze FunctionCleaning the Unit Care and MaintenanceTroubleshooting Guide Symptom Possible Problem SolutionSpecifications Power RequirementDAY Limited Warranty and Service Valid in the U.S.A only FrequencySpectra Merchandising INTERNATIONAL, INC
Top Page Image Contents