NOTE:
When you first dock your iPod/iPhone, the unit will run an authentication process, so it may not respond immediately to the SYNC button when pressed. Wait for few seconds and try pressing the SYNC Button again
An iPod /iPhone can only sync time up to the nearest minute; it’s possible to have up to 59 seconds difference between the clock radio and synced iPod/iPhone.
The iPod internal clock is automatically updated when sync’d with iTunes. We recommend you sync the iPod with iTunes prior to docking to
The iPhone receives constant updates from the phone service provider, so the iPhone time will always be current.
This
The SYNC function can only be done when the
Switching to 24 Hour format
1.) With the current time showing, press and hold the SNOOZE/SLEEP/DIMMER button until “12H” appears and flashes on the Display.
2.) Press the 
or 
buttons to switch to 24 hour format. After a few seconds the display will resume to show current clock time.
DIMMER Function
With the
RADIO OPERATIONS
TUNING THE RADIO
1.) Press the POWER/FUNCTION button on the main unit to turn on the unit. The unit
will enter iPod mode. IPod is displayed.
2.) Press the FUNCTION button again to select the RADIO mode. The FM station
frequency will be displayed.
3.) Repeatedly press the 
or 
buttons until a station is received.
4.) To automatically search for stations with strong signals, press and hold either
the 
or 
buttons. The tuner will stop on the first strong station signal it finds. The frequency reading of the tuned station will be displayed and will revert back to the current time after about 5 seconds.
5.) Adjust the sound level by pressing the VOLUME+/ALARM1 or
Notes:
Manual tune to select weaker stations that might be bypassed during the automatic tuning.
If the automatic tuning does not stop on the exact frequency of the station, for
7