TUNER OPERATION
1.Slide FUNCTION to TUNER.
show FUNCTION set to TUNER
3.Use FM MONO/STEREO to select monaural or stereo sound.
show FM MONO/STEREO set to STEREO
Note: When you select TUNER, the system automatically tunes to the station that was playing when the system was turned off or when it was last set to TUNER.
2.Set BAND to AM or FM to tune to AM or FM radio stations.
show BAND set to FM
Notes:
•The system uses a
•For the best FM reception, see “Connecting the FM Antenna” on Page 5.
•Slide FM MONO/STERO to STE- REO to select stereo sound. FM STEREO lights when the tuner receives an FM broadcast in stereo.
•If FM stereo reception is noisy, slide FM MONO/STERO to
MONO to select monaural sound. The sound is no longer in stereo, but reception should improve.
4.Rotate TUNING to select the de- sired station.
show TUNING location
5.Adjust the volume and set
8
