NOTE:
-During sleep, you may press the SLEEP BUTTON (#10) to check the remaining sleep time.
-When sleep sound is playing, its volume can be adjusted from low to high (level
-To change the sleep sound during sleep, press the SNOOZE BAR (#11) and use “Play Sleep Sound” voice command to change it as usual. The remaining sleep time will not be affected.
LISTENING TO RADIO
1.Select your desired radio band using the BAND SELECTOR (#7) for AM or FM.
2.Press the ON/OFF BUTTON (#12) to turn radio on.
3.Rotate the TUNING CONTROL (#9) to your desired radio station according to the dial scale on the unit.
4.Rotate the VOLUME CONTROL (#1) to adjust to the desired output level.
5.To turn off the radio, press the ON/OFF BUTTON (#12).
TIPS FOR BEST RECEPTION
AM – The AM antenna is located inside the cabinet of the unit. If AM reception is weak, change the position of unit until the internal antenna picks up the strongest signal.
FM – During FM reception, always keep the FM WIRE ANTENNA (#21) fully extended for best performance. However, if FM reception is weak, try repositioning the unit near an open window until you get the best reception.
USING THE LINE IN TO LISTEN TO EXTERNAL AUDIO PLAYER
You may playback your favorite music from your iPod or a portable digital audio player using the Line in function.
1.Connect the headphone jack of your external device to the LINE IN JACK (#18) at the rear cabinet of this unit using a stereo cord with a 3.5mm phone plug on either ends. (Note: the stereo cord is not included).