NOTE:
-When the preset alarm time is reached, the chosen alarm sound will start sounding at a fairly low volume level and gradually increase to a very loud volume level in 60 seconds. It will last for 60 minutes if uninterrupted.
-When the alarm is sounding, there will be a periodic pause in the alarm sound if you chose a nature sound (Ocean, Rain or Brook) or the Beep for your wake alarm. This is normal and the point where the unit is listening for one of the two Smart Talk commands (“Snooze” or “Alarm Off”).
-If radio is chosen as the alarm sound, you will not be able to use Smart Talk commands to activate snooze or turn the alarm off. This will need to be done manually by pressing either AL1 ON/OFF (#2), AL2 ON/OFF (#8) or ON/FF (#12) BUTTON.
-If the latter alarm time is reached before the first sounding alarm has ended, the first alarm will be instantly overridden and the new alarm session will sound for 60 minutes if uninterrupted.
-An active alarm will always sound no matter the unit is off, in sleep mode or playing through a radio/external MP3 player.
-If you choose the radio alarm but an external audio device remains to be connected to the LINE IN JACK (#18) by a stereo cord (not included) when the alarm time is reached, the beep alarm will automatically switch in to substitute the radio alarm.
TO CHECK THE ALARM TIME (AL1/AL2)
1.Start by saying the trigger word “Smart Talk” or press the SNOOZE BAR (#11).
2.The unit will reply “Yes” and will wait for your next command.
3.Say “Alarm” and the unit will announce the Alarm One time, play
abrief sample of the alarm sound and also ask if you want to turn the alarm off if on.
4.Alarm Two settings will be announced in the same way once the Alarm One setting checks are completed.
a.Example: You say “Alarm”.
b.The unit will reply, “Alarm One is set to …” and announce the time alarm one is set to.
c.If Alarm one is on, the unit will continue, “The Alarm is On” and play a brief sample of the alarm sound for it.