Jensen JCR-290 user manual Installing Backup Batteries, Connecting the Unit to AC Power Source

Page 8

INSTALLING BACKUP BATTERIES

1.Remove the BATTERY COMPARTMENT COVER.

2.Install 2 x 3V type CR2032 Lithium batteries (not included) according to the polarity indications on the BATTERY COMPARTMENT COVER.

3.Close the BATTERY COMPARTMENT COVER.

NOTE: The unit will operate without batteries installed, but your time and alarm settings will be lost and have to be reset in the event of a power interruption or failure.

IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit and void the warranty.

For best performance and longer operating time, we recommend the use of good quality batteries.

CAUTIONS

1.Do not mix old and new batteries.

2.Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

3.If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty.

4.Do not dispose of batteries in fire, batteries may explode or leak.

5.Replace all the batteries, no matter exhausted or not, every 2 years at the same time to avoid possible battery leakage.

CONNECTING THE UNIT TO AC POWER SOURCE

Please be sure the outlet you plug this unit into is working and provides uninterrupted power.

1.Insert the AC plug of the AC power cord into a 120V~ 60Hz outlet.

2.Press the RESET BUTTON on the bottom of the unit with a pointed object (e.g. a straighten paper clip) to initialize. After a brief self test, the unit enters the clock mode.

3.To listen to the radio, press On/Off Button.

E-7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Important Safety Instructions Page Compliance with FCC Regulations Dear Jensen CustomerTo establish a safe level Once you have established a comfortable sound levelWe Want You Listening For a Lifetime Customers RecordLocation of Controls Controls and Functions of UnitImportant Notes Power SourcesLCD Panel Indicators Installing Backup Batteries Connecting the Unit to AC Power SourceUsing Manual Settings What is Smart TALK?Setting UP Daily Alarms and Clock Using Smart Talk Smart Talk Commands Command Function Description and Factory Preset PhraseCurrent Time Setting and Reporting Alarm Time and Alarm Sound Setting / CheckingTo SET the Alarm Time AL1/AL2 To SET the Current TimePage To SET the Alarm Wake Sounds AL1/AL2 To Check the Alarm Time AL1/AL2 Example You say AlarmManual Operation Unit will now ask Would you like to turn off the Alarm?Snooze Function Turning OFF the Alarm Setting UP the Sleep Sound and Time Manual Setting Setting the Sleep SoundActivate Sleep Mode and Setting Sleep Time Using Smart Talk Setting the Sleep SoundTips for Best Reception Using the Line in to Listen to External Audio PlayerListening to Radio Dimmer Control Resetting the UnitManual Setting Specifications Care and MaintenanceTroubleshooting Guide Symptom Possible Cause SolutionDAY Limited Warranty and Service Valid in the U.S.A only 916S-J002
Top Page Image Contents