Jensen JCR-290 Smart Talk Commands, Command Function Description and Factory Preset Phrase

SMART TALK COMMANDS

COMMAND	FUNCTION DESCRIPTION AND FACTORY PRESET
PHRASE
Smart Talk	Trigger word to activate the voice recognition system.
Time	To check the current time.
	* Factory preset time is 12:00AM.
Set Time	To set the current time in AM or PM.
Alarm	To check the alarm time and status of AL1 & AL2. If the
	alarm is currently off, you have the option to turn it on or
	vice versa.
	* Factory preset alarm time is 7:00AM for AL1 and 8:00AM
	for AL2.
Set Alarm	To set the alarm time of AL1 & AL2 in AM or PM.
Alarm Sound	To set the alarm sound for AL1 & AL2. You can select from
	among 3 nature sounds (Ocean, Rain or Brook), radio or the
	beep alarm.
	* Factory preset alarm sound is beep alarm for both AL1 &
	AL2.
Alarm Off	To cancel current alarm for the day while alarming is
	sounding or clock is in snooze mode.
Snooze	To activate the 9 minute Snooze while an alarm is sounding.
	You must say the command word “Snooze” during the brief
	pause during the alarm (except radio mode in which you
	need to tap the SNOOZE BAR) for it to work correctly.
Sleep Time	To set sleep time for 15, 30, 45 or 60 minutes or to turn it off.
	* Factory preset sleep time is 60 minutes.
Play Sleep Sound	To choose a sleep sound from among 3 nature sounds
	(Ocean, Rain or Brook), or radio. If the sleep time is default
	to 60 minutes. You can adjust sleep sound output between
	levels 1-4 by pressing the > (UP) (#6) or < (DOWN) (#4)
	BUTTONS.
	* Factory preset sleep sound is Ocean and its output level
	is “2”.
Display	To set the LCD backlight brightness to HI or LO.
	* Factory preset LCD brightness is High.
Cancel	To terminate the Smart Talk function immediately after it is
	activated.
	It can also be used in the middle to terminate certain Smart
	Talk commands: Set Alarm, Alarm Sound, Sleep Time, Play
	Sleep Sound amd Display.

E-10