Honeywell TN924W user manual Comfort, Wet, Dry, Accessing Temperature and Humidity Window

Page 20

Indicator

Temperature

displayed

Range

COMFORT

20°C to 25°C

(68°F to 77°F)

 

 

 

WET

-5°C to 50°C

(23°F to122°F)

 

 

 

DRY

5°C to 50°C

(23°F to122°F)

 

 

 

Humidity

Range

40%RH- 70%RH

OVER

70%RH

BELOW 40%RH

Shows current condition

Ideal for both relative

humidity and temperature

Contains excess moisture

Contains inadequate

moisture

temperature for the corresponding channel, the upper temperature alert with ▲icon (if disabled, displays OFF), or lower temperature alert with ▼ icon (if disabled, displays OFF).

Once the above alerts are displayed, press the UP or DOWN to enable or disable the corresponding alert.

PROGRAMMING ALARMS

•In the Temperature and Humidity Window, press ALARM/CHART selecting the desired alarm.

•Press and hold ALARM/CHART button until the remote temperature and ▲or ▼ icon starts flashing.

•Adjust the temperature digits for the Temperature Alarm using the UP or DOWN. Press and hold either button for fast digits advance

•Press the ALARM/CHART to confirm selection and return to the temperature alarm selection screen

ACCESSING TEMPERATURE AND HUMIDITY WINDOW

Press UP or DOWN until the IN icon on the upper right will flash.

VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY

Static Display:

In Temperature and Humidity Window, press the CHANNEL button to recall a different channel.

Channel Auto-Scan Display:

To enable automatic scan of the different channels, press and hold CHANNEL, until the

3icon is displayed. Each valid channel will be alternately displayed with a 5 seconds delay.

NOTE: The channel Auto-scan feature can be active only if there are more than one remote sensors operating and are set to different channels.

RECALLING TEMPERATURE AND DEW POINT INFORMATION

In Temperature and Humidity Window press SET button recalling either:

•Temperature and relative humidity

•Dew point and relative humidity

PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENGEIT

In Temperature and Humidity Window, press and hold SET to toggle the temperature in Celsius (ºC) or Fahrenheit (ºF).

ACTIVATING OR DEACTIVATING ALARMS

In Temperature and Humidity Window, press the ALARM/CHART to recall a current

39

VIEWING REMOTE TEMPERATUR AND HUMIDITY MAX/MIN READINNGS In the Temperature and Humidity Window press the MEM button recalling:

•Current temperature and humidity

•Minimum temperature and humidity

•Maximum temperature and humidity at the remote location.

RESETTING REMOTE TEMPERATURE AND HUMIDITY MEMORY

In the Temperature and Humidity Window, press and hold MEM button to clear memory for all channels.

REMOTE SENSOR STATUS

The wave icon above the current channel number shows the connection status of the corresponding remote sensor:

Icon

Status

Searching for the signals from the remote sensor

Corresponding remote sensor signal received successfully

No signals received for over 15 minutes

ALL REMOTE SENSORS SIGNAL ACTIVATION

The main unit can be manually activated to search for the signals from remote sensors by pressing and holding DOWN button.

40

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Honeywell Weather Information Station TN924WStandard Package Contents IntroductionInstallation Before YOU BeginFeatures Battery InstallationPlacement MountingWind Vane Wind CupsAssembly Power TimeDisplay Front RearMain Display Unit Overview SideALARM/CHART Weather Station Controls PanelSET ChannelCustomizing Your Weather Radio Weather RadioAbout the National Weather Radio System Alerts Selection Press or selecting ADVISORY, Watch or WarningProgramming Your Location Multiple or Single optionTesting Your Weather Radio Signal Loss ReminderAlert Mode Selection Activating or Deactivating Audible AlertsWeather Station Navigating Through the ModesConnecting Weather Station to a Personal Computer Customizing Your Weather StationRain Window Wind WindowUsing Different Weather Station Windows Accessing Weather and Pressure WindowsViewing Pressure and Altitude Information Programming SEA Level PressureViewing PRESSURE, Temperature and Humidity BAR Charts Viewing Moon Phase History and Weather ForecastUnderstanding Moon Phase Icons Viewving SEA Level Pressure HistoryAccessing Time Window Activating or Deactivating AlarmsProgramming Alarms AUTO-PROGRAMMINGIcon Atomic Time Reception Strength To disable alarms SUNRISE/SUNSET WindowActivating or Deactivating Snooze Wwvb Radio Controlled TimeTemperature and Humidity Window Accessing Temperature and Humidity Window Viewing Remote Channel Temperature and HumidityRecalling Temperature and DEW Point Information Programming Temperature in Celsius or FahrengeitRain Window Wind WindowMaintanance Troubleshooting PrecautionsSymptom Solution WEATHER/SNOOZE isAppendix 1 City Codes US and Canadian CitiesAppendix 2 NWR Alert Messages DST Daylight Savings Time definitionsSpecifications Temperature IndoorRadio Frequency 433 MHz Barometric PressureTemperature remote Battery life alkaline Main unit around 24 hoursWeight without batteries DimensionsDeclaration of Conformity Standard Warranty InformationFCC Statement

TN924W specifications

The Honeywell TN924W is a state-of-the-art wireless thermostat designed to optimize home heating and cooling systems while ensuring energy efficiency and user convenience. This smart thermostat combines advanced technology with a user-friendly interface, making it an ideal choice for homeowners seeking to enhance their comfort while reducing energy consumption.

One of the main features of the TN924W is its Wi-Fi connectivity, allowing users to control their home temperature remotely through a smartphone app. The Honeywell Home app provides an intuitive platform for users to adjust heating and cooling schedules, monitor energy usage, and receive alerts, all from the convenience of their mobile devices. This capability not only increases comfort but also helps homeowners save on energy bills by enabling better management of heating and cooling patterns.

Another significant aspect of the TN924W is its compatibility with a wide range of heating and cooling systems. Whether it's a traditional HVAC setup, a heat pump, or a non-programmable system, the TN924W integrates seamlessly to deliver precise temperature control. This versatility ensures that users can enjoy the benefits of smart technology regardless of their existing system.

The TN924W also boasts a user-friendly touchscreen interface that simplifies programming and adjustments. With its clear display, users can easily navigate through the settings and customize their heating and cooling schedules. The thermostat supports multi-stage systems, allowing for more refined temperature management, which is particularly beneficial in larger homes or spaces with varying temperature needs.

In terms of energy-saving technology, the TN924W features Honeywell's Smart Response Technology. This innovative system anticipates heating and cooling needs based on various factors, such as current temperature, the time of day, and user habits, ensuring that the home is at the desired temperature when needed. Moreover, the thermostat can provide energy usage reports, empowering users with insights into their consumption patterns and opportunities for additional savings.

Overall, the Honeywell TN924W stands out as a leading choice for homeowners who prioritize comfort, convenience, and energy efficiency. Its advanced features, compatibility with diverse systems, and ease of use make it a valuable addition to any smart home.
Top Page Image Contents