Honeywell TN924W user manual Maintanance

Page 22

ACTIVATING OR DEACTIVATING ALARMS

In the Wind Window press ALARM/CHART to recall

•Current wind speed

•Wind speed alarm with the “ALARM HI” displayed

•Wind gust alarm with the “GUST ALARM HI” displayed

•Daily maximum wind speed with “DAILY MAX” displayed

If the specific alarm is disabled, “OFF” will be displayed; otherwise the alarm value will be shown.

When the wind alarm is displayed, press the UP or DOWN to activate or deactivate it.

PROGRAMMING HIGH WIND ALARM

•In the Wind Window, press ALARM/CHART to select the desired alarm (wind speed or wind gust speed)

•Press and hold ALARM/CHART button until speed digit will flash.

•Set the alarm using the UP or DOWN. Press and hold either button for fast digits advance.

•Press ALARM/CHART to confirm your selection and return to the high wind alarm selection screen.

43

MAINTANANCE

CHANGING BATTERIES

The battery status of each weather sensor is checked every hour. If the low battery indicator lights up, replace the batteries in the corresponding unit.

CHANGING BATTERIES IN THE MAIN NUIT

•First connect the AC/DC adaptor provided to the main unit to avoid losing any data

•Remove the battery compartment door on the back and replace all batteries. Do not mix old and new batteries

•Replace the battery compartment door

CHANGING BATTERIES IN REMOTE SENSORS

•Replace the batteries following the setup instructions for the corresponding sensor

•When the batteries are properly installed, the remote weather sensor will resume sending signals to the main unit

•To enforce an immediate remote signals search, press and hold DOWN on the main unit.

CLEANING

The main unit and outer casings of the remote weather sensors can be cleaned with a damp cloth. Small parts can be cleaned with a cotton tip or pipe-cleaner.

Never use any abrasive cleaning agents and solvents. Do not immerse any units with electronic parts in water or under running water.

ANEMOMETER

Check if the wind vane and wind cups can spin freely and are free from dirt, debris and spider webs.

RAIN GAUGE

Checking and cleaning the rain sensor in a timely manner will maintain an accuracy of the precipitation measurements.

•Detach the protective screen and lid

•Clean with soapy water and a damp cloth, removing dirt, leaves or debris

•Clean small holes and parts with Q-tips or pipe-cleaner

•Watch out for spiders or insects that might have crawled into the funnel

•Clean the swinging mechanism with a damp cloth

44

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Honeywell Weather Information Station TN924WStandard Package Contents IntroductionInstallation Before YOU BeginPlacement FeaturesBattery Installation MountingWind Vane Wind CupsAssembly Display PowerTime Front RearMain Display Unit Overview SideSET ALARM/CHARTWeather Station Controls Panel ChannelAbout the National Weather Radio System Weather RadioCustomizing Your Weather Radio Programming Your Location Alerts SelectionPress or selecting ADVISORY, Watch or Warning Multiple or Single optionAlert Mode Selection Testing Your Weather RadioSignal Loss Reminder Activating or Deactivating Audible AlertsWeather Station Navigating Through the ModesRain Window Connecting Weather Station to a Personal ComputerCustomizing Your Weather Station Wind WindowViewing Pressure and Altitude Information Using Different Weather Station WindowsAccessing Weather and Pressure Windows Programming SEA Level PressureUnderstanding Moon Phase Icons Viewing PRESSURE, Temperature and Humidity BAR ChartsViewing Moon Phase History and Weather Forecast Viewving SEA Level Pressure HistoryProgramming Alarms Accessing Time WindowActivating or Deactivating Alarms AUTO-PROGRAMMINGActivating or Deactivating Snooze Icon Atomic Time Reception Strength To disable alarmsSUNRISE/SUNSET Window Wwvb Radio Controlled TimeTemperature and Humidity Window Recalling Temperature and DEW Point Information Accessing Temperature and Humidity WindowViewing Remote Channel Temperature and Humidity Programming Temperature in Celsius or FahrengeitRain Window Wind WindowMaintanance Symptom Solution TroubleshootingPrecautions WEATHER/SNOOZE isAppendix 1 City Codes US and Canadian CitiesAppendix 2 NWR Alert Messages DST Daylight Savings Time definitionsRadio Frequency 433 MHz SpecificationsTemperature Indoor Barometric PressureWeight without batteries Temperature remoteBattery life alkaline Main unit around 24 hours DimensionsFCC Statement Standard Warranty InformationDeclaration of Conformity

TN924W specifications

The Honeywell TN924W is a state-of-the-art wireless thermostat designed to optimize home heating and cooling systems while ensuring energy efficiency and user convenience. This smart thermostat combines advanced technology with a user-friendly interface, making it an ideal choice for homeowners seeking to enhance their comfort while reducing energy consumption.

One of the main features of the TN924W is its Wi-Fi connectivity, allowing users to control their home temperature remotely through a smartphone app. The Honeywell Home app provides an intuitive platform for users to adjust heating and cooling schedules, monitor energy usage, and receive alerts, all from the convenience of their mobile devices. This capability not only increases comfort but also helps homeowners save on energy bills by enabling better management of heating and cooling patterns.

Another significant aspect of the TN924W is its compatibility with a wide range of heating and cooling systems. Whether it's a traditional HVAC setup, a heat pump, or a non-programmable system, the TN924W integrates seamlessly to deliver precise temperature control. This versatility ensures that users can enjoy the benefits of smart technology regardless of their existing system.

The TN924W also boasts a user-friendly touchscreen interface that simplifies programming and adjustments. With its clear display, users can easily navigate through the settings and customize their heating and cooling schedules. The thermostat supports multi-stage systems, allowing for more refined temperature management, which is particularly beneficial in larger homes or spaces with varying temperature needs.

In terms of energy-saving technology, the TN924W features Honeywell's Smart Response Technology. This innovative system anticipates heating and cooling needs based on various factors, such as current temperature, the time of day, and user habits, ensuring that the home is at the desired temperature when needed. Moreover, the thermostat can provide energy usage reports, empowering users with insights into their consumption patterns and opportunities for additional savings.

Overall, the Honeywell TN924W stands out as a leading choice for homeowners who prioritize comfort, convenience, and energy efficiency. Its advanced features, compatibility with diverse systems, and ease of use make it a valuable addition to any smart home.
Top Page Image Contents