Ericsson LBI-38732D manual Low Battery Alert Transmit Lockout, Key Press Alert

Page 33

Low Battery Alert (Transmit Lockout)

If the radio is keyed and the user hears either a low-pitched tone or two tones and the LOW BATT status indicator is displayed, the battery is discharged and the radio will not transmit. Pressing the PTT or CLEAR button will reset the LOW BATT status indicator if either is pre-programmed to perform this function. The radio will still be able to receive calls until the battery is dis- charged beyond the point of operation, after which the battery will need to be recharged to resume normal operation.

Key Press Alert

A short tone or "beep" sounds to indicate a key has been pressed. A short low-pitched tone indicates no action was taken because the key is not active in the current mode.

OPERATION

KEYPAD LOCK/UNLOCK

The keypad can be locked at any ti e to prevent undesired key presses. To lock the keypad when it is in the unlocked state, press and release the mkey and then within one (1) second press the OPTION button. All buttons and keys except the PTT, OPTION, CLEAR/MONITOR and EMERGENCY/HOME buttons will now be inhibited. If the emergency function of the EMERGENCY/HOME button is disabled, the home func- tion will also be inhibited. If the button is enabled for emergency or emergency/home function, the key is not inhibited and an emergency can still be declared on the

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Ericssonz Page Table of Contents Edacs Trunked Mode Operation Conventional Mode Operation Warranty Safety Information Battery Charging and Care Page For Best Performance Extended Operations FCC Licensing Transceiver ServiceIntroduction User Interface RK II Portable Radio Top And Partial Left Panel Views Buttons and Knobs Page Talk but PUSH-TOTON PTT KeypadTer key Page RK II Display DisplaySYS Busy MessagesCC Scan Txemer TX Data KEY Zero Status Indicators Page Universal Device Connector UDC Call Queued Trunked Mode Only Autokey Trunked Mode OnlyAlert Tones Call OriginateCall Denied Trunked Mode Only System Busy Trunked Mode OnlyCarrier Control Timer Low Battery WarningLow Battery Alert Transmit Lockout Key Press AlertOperation Keypad LOCK/UNLOCK Turning on the Radio Y = Z Z Z X X X X XU T H S =L S Y S Menu N U Y Y Y Y Y Y N U K L G H TK L = X X Page PHN Call Feature DisplaySystem Selection SYSTEM/GROUP/CHANNEL SelectionDisplay registers the new system name on line one Group And Channel Selection Home EMERGENCY/HOME Button DefinitionVoice Modes Aegis and Voice Guard OperationClear Modes Aegis Digital ModeDtmf DSP ERR HardwareAegis Private and Voice Guard Private Modes Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Private Operation Receiving An Encrypted CallTransmitting An Encrypted Call Scanned Group Calls Page Receiving a Call Edacs Trunked Mode OperationSending a Call Conventional Failsoft Emergency Operation Scat OperationDeclaring An Emergency Call Receiving An Emergency CallScanning Trunked Systems Wide Area System ScanProSound Priority System Scan Scanning Trunked GroupsAdding Groups To a Scan List Deleting Groups From a Scan List Nuisance DeleteTurning Scan On Turning Scan Off Programmable Entries Is pressed Individual CallsPage Call Storage Lists Sending An Individual Call Trunked Mode Only Receiving a Telephone Interconnect Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Page Portable Data Data Displays Data On Operation Data Off OperationExiting Data Calls Scan Lockout ModeData Lockout Mode ProFile Select OptionMenu Option Option Availability Status Operation STATUS/MESSAGE OperationMessage Operation Dynamic Regroup Operation Edacs Conventional P1 ScanMacro KEY Operation Emergency OperationThis page intentionally left blank Squelch Adjust 256K & UP Version Radios only Conventional Mode OperationMenu Selection Pre-Programmed Keypad Key Sending a Call Page Tone Encode Transmission Using 5-Tone Signalling For Emergency DeclarationScanning Conventional Channels Adding Channels to a Scan List Deleting Channels from a Scan List Nuisance DeleteTurning Scan on Type 99 Decode Conventional only Turning Scan OFFPage This page intentionally left blank Operating Rules and Regulations Operating Tips Intrinsically Safe Usage Battery PacksAccessories Glossary Access multiple fleets. Trunked Mode Only100 101 102 103 104 105 106 Warranty107 NICKEL-CADMIUM Battery WarrantyEmergency Numbers

LBI-38732D specifications

The Ericsson LBI-38732D is a cutting-edge telecommunications device that has carved a niche in the realm of radio systems used for mobile networks. This advanced equipment serves as a foundational component within various radio access network (RAN) architectures, enabling robust and seamless communication services.

One of the main features of the LBI-38732D is its support for multiple frequency bands, making it a versatile option in the evolution from 4G LTE to 5G networks. Its adaptive radio technology ensures that it can efficiently handle different bandwidths, providing a flexible solution for network operators looking to optimize their spectrum usage. This adaptability is crucial as mobile data demands continue to rise globally.

Another significant characteristic of the LBI-38732D is its implementation of Massive MIMO (Multiple Input, Multiple Output) technology. This feature enhances spectral efficiency and increases the capacity of the network by allowing multiple data streams to be transmitted simultaneously across the same frequency band. As a result, users can experience higher data rates and improved service quality, particularly in densely populated urban areas.

The LBI-38732D also includes advanced beamforming capabilities, which focus the signal towards users rather than broadcasting it in all directions. This precise signal targeting improves signal strength, reduces interference, and enhances overall network performance. In combination with its energetic performance in both indoor and outdoor environments, users can expect superior connectivity.

In terms of energy efficiency, the Ericsson LBI-38732D has been designed with sustainability in mind. Its energy-efficient design helps operators reduce their carbon footprint and operational costs. By optimizing power consumption, telecommunications companies can invest in further network enhancements and expansions.

Moreover, the LBI-38732D is equipped with comprehensive network management and monitoring features. This allows operators to maintain high levels of service quality while efficiently managing network resources. The device supports remote diagnostics and updates, contributing to reduced downtime and improved operational efficiency.

In conclusion, the Ericsson LBI-38732D stands out in telecommunications infrastructure through its support for multiple bands, Massive MIMO technology, advanced beamforming capabilities, energy efficiency, and robust network management. As mobile networks evolve, this device exemplifies the type of innovation that drives connectivity forward, ensuring that users receive the high-quality service they demand.
Top Page Image Contents