Ericsson LBI-38732D manual Scanning Conventional Channels

Page 89

will become active for voice communication after the tone sequence is complete.

Tone encode will be transmitted with Channel Guard, if one is defined, and tones are always transmitted in clear voice mode, even if the channel is set for digital or private (see VOICE MODES). Digital or private voice transmission will resume normally after the tone trans- mission.

SCANNING CONVENTIONAL CHANNELS

Channels which have been previously added to the scan list on a per system basis may be scanned. The selected channel is scanned (if enabled through pro- gramming) whether or not it is in the scan list. Each conventional system’s channel scan list is retained in memory when the radio is turned off or when the battery pack is removed.

The scan rate will vary depending upon the number of channels in the scan list and whether or not the radio is programmed to scan for channels with decoding en- abled. Fewer channels will result in a faster scan rate. If programmed for dual-priority scan operation, the priority- one, priority-two and the remaining scan list channels are scanned. Once a signal is detected and the correct encoded squelch signal is decoded (if programmed), the radio receives the message and displays the received scan channel. At the same time, scanning continues on the priority-one and priority-two channels. Should the priority-one or priority-two channel carrier, regardless of encoded squelch decoding, be detected while a non-pri- ority channel is being received, the display name is updated, 1 or 2 comes on and the received channel is

89

Page 88 Page 90
Image 89
Page 88 Page 90
Contents Ericssonz Page Table of Contents Edacs Trunked Mode Operation Conventional Mode Operation Warranty Safety Information Battery Charging and Care Page For Best Performance Extended Operations FCC Licensing Transceiver ServiceIntroduction User Interface RK II Portable Radio Top And Partial Left Panel Views Buttons and Knobs Page Talk but PUSH-TOTON PTT KeypadTer key Page RK II Display DisplaySYS Busy MessagesCC Scan Txemer TX Data KEY Zero Status Indicators Page Universal Device Connector UDC Call Queued Trunked Mode Only Autokey Trunked Mode OnlyAlert Tones Call OriginateCall Denied Trunked Mode Only System Busy Trunked Mode OnlyCarrier Control Timer Low Battery WarningOperation Keypad LOCK/UNLOCK Low Battery Alert Transmit LockoutKey Press Alert Turning on the Radio Y = Z Z Z X X X X XU T H S =L S Y S Menu K L = X X N U Y Y Y Y Y YN U K L G H T Page PHN Call Feature DisplaySystem Selection SYSTEM/GROUP/CHANNEL SelectionDisplay registers the new system name on line one Group And Channel Selection Home EMERGENCY/HOME Button DefinitionVoice Modes Aegis and Voice Guard OperationClear Modes Aegis Digital ModeDtmf Aegis Private and Voice Guard Private Modes DSP ERRHardware Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Transmitting An Encrypted Call Private OperationReceiving An Encrypted Call Scanned Group Calls Page Receiving a Call Edacs Trunked Mode OperationSending a Call Conventional Failsoft Emergency Operation Scat OperationDeclaring An Emergency Call Receiving An Emergency CallProSound Scanning Trunked SystemsWide Area System Scan Adding Groups To a Scan List Priority System ScanScanning Trunked Groups Turning Scan On Deleting Groups From a Scan ListNuisance Delete Turning Scan Off Programmable Entries Is pressed Individual CallsPage Call Storage Lists Sending An Individual Call Trunked Mode Only Telephone Interconnect Calls Receiving a Telephone Interconnect Call Trunked Mode OnlySending a Telephone Interconnect Call Trunked Mode Only Dtmf Overdial/Conventional Mode Telephone Interconnect Page Portable Data Data Displays Data On Operation Data Off OperationExiting Data Calls Scan Lockout ModeMenu Option Data Lockout ModeProFile Select Option Option Availability Status Operation STATUS/MESSAGE OperationMessage Operation Dynamic Regroup Operation Edacs Conventional P1 ScanMacro KEY Operation Emergency OperationThis page intentionally left blank Squelch Adjust 256K & UP Version Radios only Conventional Mode OperationMenu Selection Pre-Programmed Keypad Key Sending a Call Page Tone Encode Transmission Using 5-Tone Signalling For Emergency DeclarationScanning Conventional Channels Adding Channels to a Scan List Turning Scan on Deleting Channels from a Scan ListNuisance Delete Type 99 Decode Conventional only Turning Scan OFFPage This page intentionally left blank Operating Rules and Regulations Operating Tips Intrinsically Safe Usage Battery PacksAccessories Glossary Access multiple fleets. Trunked Mode Only100 101 102 103 104 105 106 Warranty107 NICKEL-CADMIUM Battery WarrantyEmergency Numbers

LBI-38732D specifications

The Ericsson LBI-38732D is a cutting-edge telecommunications device that has carved a niche in the realm of radio systems used for mobile networks. This advanced equipment serves as a foundational component within various radio access network (RAN) architectures, enabling robust and seamless communication services.

One of the main features of the LBI-38732D is its support for multiple frequency bands, making it a versatile option in the evolution from 4G LTE to 5G networks. Its adaptive radio technology ensures that it can efficiently handle different bandwidths, providing a flexible solution for network operators looking to optimize their spectrum usage. This adaptability is crucial as mobile data demands continue to rise globally.

Another significant characteristic of the LBI-38732D is its implementation of Massive MIMO (Multiple Input, Multiple Output) technology. This feature enhances spectral efficiency and increases the capacity of the network by allowing multiple data streams to be transmitted simultaneously across the same frequency band. As a result, users can experience higher data rates and improved service quality, particularly in densely populated urban areas.

The LBI-38732D also includes advanced beamforming capabilities, which focus the signal towards users rather than broadcasting it in all directions. This precise signal targeting improves signal strength, reduces interference, and enhances overall network performance. In combination with its energetic performance in both indoor and outdoor environments, users can expect superior connectivity.

In terms of energy efficiency, the Ericsson LBI-38732D has been designed with sustainability in mind. Its energy-efficient design helps operators reduce their carbon footprint and operational costs. By optimizing power consumption, telecommunications companies can invest in further network enhancements and expansions.

Moreover, the LBI-38732D is equipped with comprehensive network management and monitoring features. This allows operators to maintain high levels of service quality while efficiently managing network resources. The device supports remote diagnostics and updates, contributing to reduced downtime and improved operational efficiency.

In conclusion, the Ericsson LBI-38732D stands out in telecommunications infrastructure through its support for multiple bands, Massive MIMO technology, advanced beamforming capabilities, energy efficiency, and robust network management. As mobile networks evolve, this device exemplifies the type of innovation that drives connectivity forward, ensuring that users receive the high-quality service they demand.
Top Page Image Contents