Ericsson LBI-38732D manual Individual Calls, Is pressed

Page 65

INDIVIDUAL CALLS

Receiving And Responding To An Individual Call (Trunked Mode Only)

When the radio receives an individual call (a call directed only to the user’s radio), it unmutes on the assigned working channel and turns on the BSY indi- cator. Line one shows ID followed by the logical ID number of the unit sending the message, or the associ- ated name if the ID number is found in the individual call list. The individual call indicator display *INDV* is dis- played on line two. The radio can be programmed to ring when an individual call is received. If enabled, the ring begins five seconds after the caller unkeys and will continue￿until the PTT button, the CLEAR button or

is pressed.

If a response is made to the call prior to the pro- grammed call-back time-out, the call will automatically be directed to the originating unit. If a response is not made before the call-back time-out, the radio will return to

normal receive mode, but WHC will be displayed. If the caller’s ID is not received, UNKNOWN will display for the duration of the call and there will be no call-back hang- time.

￿To respond after the call-back time-out, press the key. The radio’s display will show the caller’s ID on the first line and WHCI=1 on the second line. Pressing

the PTT button at this point will initiate an individual call back to the original caller. (If the last call was a group call, the display will show WHCG=1. Pressing the PTT button will place the call as an individual call.) The radio

65

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Ericssonz Page Table of Contents Edacs Trunked Mode Operation Conventional Mode Operation Warranty Safety Information Battery Charging and Care Page For Best Performance Extended Operations FCC Licensing Transceiver ServiceIntroduction User Interface RK II Portable Radio Top And Partial Left Panel Views Buttons and Knobs Page Talk but PUSH-TOTON PTT KeypadTer key Page RK II Display DisplaySYS Busy MessagesCC Scan Txemer TX Data KEY Zero Status Indicators Page Universal Device Connector UDC Call Queued Trunked Mode Only Autokey Trunked Mode OnlyAlert Tones Call OriginateCall Denied Trunked Mode Only System Busy Trunked Mode OnlyCarrier Control Timer Low Battery WarningOperation Keypad LOCK/UNLOCK Low Battery Alert Transmit LockoutKey Press Alert Turning on the Radio Y = Z Z Z X X X X XU T H S =L S Y S Menu K L = X X N U Y Y Y Y Y YN U K L G H T Page PHN Call Feature DisplaySystem Selection SYSTEM/GROUP/CHANNEL SelectionDisplay registers the new system name on line one Group And Channel Selection Home EMERGENCY/HOME Button DefinitionVoice Modes Aegis and Voice Guard OperationClear Modes Aegis Digital ModeDtmf Aegis Private and Voice Guard Private Modes DSP ERRHardware Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Transmitting An Encrypted Call Private OperationReceiving An Encrypted Call Scanned Group Calls Page Receiving a Call Edacs Trunked Mode OperationSending a Call Conventional Failsoft Emergency Operation Scat OperationDeclaring An Emergency Call Receiving An Emergency CallProSound Scanning Trunked SystemsWide Area System Scan Adding Groups To a Scan List Priority System ScanScanning Trunked Groups Turning Scan On Deleting Groups From a Scan ListNuisance Delete Turning Scan Off Programmable Entries Is pressed Individual CallsPage Call Storage Lists Sending An Individual Call Trunked Mode Only Telephone Interconnect Calls Receiving a Telephone Interconnect Call Trunked Mode OnlySending a Telephone Interconnect Call Trunked Mode Only Dtmf Overdial/Conventional Mode Telephone Interconnect Page Portable Data Data Displays Data On Operation Data Off OperationExiting Data Calls Scan Lockout ModeMenu Option Data Lockout ModeProFile Select Option Option Availability Status Operation STATUS/MESSAGE OperationMessage Operation Dynamic Regroup Operation Edacs Conventional P1 ScanMacro KEY Operation Emergency OperationThis page intentionally left blank Squelch Adjust 256K & UP Version Radios only Conventional Mode OperationMenu Selection Pre-Programmed Keypad Key Sending a Call Page Tone Encode Transmission Using 5-Tone Signalling For Emergency DeclarationScanning Conventional Channels Adding Channels to a Scan List Turning Scan on Deleting Channels from a Scan ListNuisance Delete Type 99 Decode Conventional only Turning Scan OFFPage This page intentionally left blank Operating Rules and Regulations Operating Tips Intrinsically Safe Usage Battery PacksAccessories Glossary Access multiple fleets. Trunked Mode Only100 101 102 103 104 105 106 Warranty107 NICKEL-CADMIUM Battery WarrantyEmergency Numbers

LBI-38732D specifications

The Ericsson LBI-38732D is a cutting-edge telecommunications device that has carved a niche in the realm of radio systems used for mobile networks. This advanced equipment serves as a foundational component within various radio access network (RAN) architectures, enabling robust and seamless communication services.

One of the main features of the LBI-38732D is its support for multiple frequency bands, making it a versatile option in the evolution from 4G LTE to 5G networks. Its adaptive radio technology ensures that it can efficiently handle different bandwidths, providing a flexible solution for network operators looking to optimize their spectrum usage. This adaptability is crucial as mobile data demands continue to rise globally.

Another significant characteristic of the LBI-38732D is its implementation of Massive MIMO (Multiple Input, Multiple Output) technology. This feature enhances spectral efficiency and increases the capacity of the network by allowing multiple data streams to be transmitted simultaneously across the same frequency band. As a result, users can experience higher data rates and improved service quality, particularly in densely populated urban areas.

The LBI-38732D also includes advanced beamforming capabilities, which focus the signal towards users rather than broadcasting it in all directions. This precise signal targeting improves signal strength, reduces interference, and enhances overall network performance. In combination with its energetic performance in both indoor and outdoor environments, users can expect superior connectivity.

In terms of energy efficiency, the Ericsson LBI-38732D has been designed with sustainability in mind. Its energy-efficient design helps operators reduce their carbon footprint and operational costs. By optimizing power consumption, telecommunications companies can invest in further network enhancements and expansions.

Moreover, the LBI-38732D is equipped with comprehensive network management and monitoring features. This allows operators to maintain high levels of service quality while efficiently managing network resources. The device supports remote diagnostics and updates, contributing to reduced downtime and improved operational efficiency.

In conclusion, the Ericsson LBI-38732D stands out in telecommunications infrastructure through its support for multiple bands, Massive MIMO technology, advanced beamforming capabilities, energy efficiency, and robust network management. As mobile networks evolve, this device exemplifies the type of innovation that drives connectivity forward, ensuring that users receive the high-quality service they demand.
Top Page Image Contents