Ericsson LBI-38732D manual Edacs Conventional P1 Scan, Dynamic Regroup Operation

Page 80

text selection can also be cancelled by pressing the CLEAR button prior to the time-out period.

To view the currently selected message text after it has been transmitted, press the &key and then the CLEAR button prior to the time-out period.If the message text was not sent successfully to the site, the text asso- ciated with the message will flash in the display.

EDACS CONVENTIONAL P1 SCAN

This feature permits the radio user to scan a pre-pro- grammed conventional system and channel as a Priority 1 (P1) channel while the radio is selected for EDACS trunked system. If activity is detected on the conventional P1 channel, the radio will unmute and remain on this conventional channel for the programmable hang time.

The radio must be pre-programmed to designate a key for scan on/off operation.

DYNAMIC REGROUP OPERATION

Dynamic group operation permits multiple talk groups (up to eight) to be added to a radio via the system manager. The radio must be pre-programmed to re- spond to regrouping. Dynamic regrouping will not be activated in a radio until an activation message is sent by the system manager. Each radio that receives and ac- knowledges the regrouping instructions is successfully regrouped.

Pressing and holding the CLEAR/MONITOR button for 2.5 seconds toggles the user into and out of the dynamic regroup groupset. A double beep will sound for

80

Page 79 Page 81
Image 80
Page 79 Page 81
Contents Ericssonz Page Table of Contents Edacs Trunked Mode Operation Conventional Mode Operation Warranty Safety Information Battery Charging and Care Page For Best Performance Extended Operations Transceiver Service FCC LicensingIntroduction User Interface RK II Portable Radio Top And Partial Left Panel Views Buttons and Knobs Page PUSH-TO Talk butTON PTT KeypadTer key Page Display RK II DisplayMessages SYS BusyCC Scan Txemer TX Data KEY Zero Status Indicators Page Universal Device Connector UDC Autokey Trunked Mode Only Call Queued Trunked Mode OnlyAlert Tones Call OriginateSystem Busy Trunked Mode Only Call Denied Trunked Mode OnlyCarrier Control Timer Low Battery WarningOperation Keypad LOCK/UNLOCK Low Battery Alert Transmit LockoutKey Press Alert Turning on the Radio X X X X X Y = Z Z ZU T H S =L S Y S Menu K L = X X N U Y Y Y Y Y YN U K L G H T Page Feature Display PHN CallSYSTEM/GROUP/CHANNEL Selection System SelectionDisplay registers the new system name on line one Group And Channel Selection EMERGENCY/HOME Button Definition HomeAegis and Voice Guard Operation Voice ModesAegis Digital Mode Clear ModesDtmf Aegis Private and Voice Guard Private Modes DSP ERRHardware Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Transmitting An Encrypted Call Private OperationReceiving An Encrypted Call Scanned Group Calls Page Edacs Trunked Mode Operation Receiving a CallSending a Call Conventional Failsoft Scat Operation Emergency OperationReceiving An Emergency Call Declaring An Emergency CallProSound Scanning Trunked SystemsWide Area System Scan Adding Groups To a Scan List Priority System ScanScanning Trunked Groups Turning Scan On Deleting Groups From a Scan ListNuisance Delete Turning Scan Off Programmable Entries Individual Calls Is pressedPage Call Storage Lists Sending An Individual Call Trunked Mode Only Telephone Interconnect Calls Receiving a Telephone Interconnect Call Trunked Mode OnlySending a Telephone Interconnect Call Trunked Mode Only Dtmf Overdial/Conventional Mode Telephone Interconnect Page Portable Data Data Displays Data Off Operation Data On OperationScan Lockout Mode Exiting Data CallsMenu Option Data Lockout ModeProFile Select Option Option Availability STATUS/MESSAGE Operation Status OperationMessage Operation Edacs Conventional P1 Scan Dynamic Regroup OperationEmergency Operation Macro KEY OperationThis page intentionally left blank Conventional Mode Operation Squelch Adjust 256K & UP Version Radios onlyMenu Selection Pre-Programmed Keypad Key Sending a Call Page Using 5-Tone Signalling For Emergency Declaration Tone Encode TransmissionScanning Conventional Channels Adding Channels to a Scan List Turning Scan on Deleting Channels from a Scan ListNuisance Delete Turning Scan OFF Type 99 Decode Conventional onlyPage This page intentionally left blank Operating Rules and Regulations Operating Tips Battery Packs Intrinsically Safe UsageAccessories Access multiple fleets. Trunked Mode Only Glossary100 101 102 103 104 105 Warranty 106NICKEL-CADMIUM Battery Warranty 107Emergency Numbers

LBI-38732D specifications

The Ericsson LBI-38732D is a cutting-edge telecommunications device that has carved a niche in the realm of radio systems used for mobile networks. This advanced equipment serves as a foundational component within various radio access network (RAN) architectures, enabling robust and seamless communication services.

One of the main features of the LBI-38732D is its support for multiple frequency bands, making it a versatile option in the evolution from 4G LTE to 5G networks. Its adaptive radio technology ensures that it can efficiently handle different bandwidths, providing a flexible solution for network operators looking to optimize their spectrum usage. This adaptability is crucial as mobile data demands continue to rise globally.

Another significant characteristic of the LBI-38732D is its implementation of Massive MIMO (Multiple Input, Multiple Output) technology. This feature enhances spectral efficiency and increases the capacity of the network by allowing multiple data streams to be transmitted simultaneously across the same frequency band. As a result, users can experience higher data rates and improved service quality, particularly in densely populated urban areas.

The LBI-38732D also includes advanced beamforming capabilities, which focus the signal towards users rather than broadcasting it in all directions. This precise signal targeting improves signal strength, reduces interference, and enhances overall network performance. In combination with its energetic performance in both indoor and outdoor environments, users can expect superior connectivity.

In terms of energy efficiency, the Ericsson LBI-38732D has been designed with sustainability in mind. Its energy-efficient design helps operators reduce their carbon footprint and operational costs. By optimizing power consumption, telecommunications companies can invest in further network enhancements and expansions.

Moreover, the LBI-38732D is equipped with comprehensive network management and monitoring features. This allows operators to maintain high levels of service quality while efficiently managing network resources. The device supports remote diagnostics and updates, contributing to reduced downtime and improved operational efficiency.

In conclusion, the Ericsson LBI-38732D stands out in telecommunications infrastructure through its support for multiple bands, Massive MIMO technology, advanced beamforming capabilities, energy efficiency, and robust network management. As mobile networks evolve, this device exemplifies the type of innovation that drives connectivity forward, ensuring that users receive the high-quality service they demand.
Top Page Image Contents